Table of Contents
This is an old revision of the document!
REF: Body Parts - Sub-01T
Kickstand Mods
Kickstand riser:
This mod was devised after lowering the shocks on a standard 2000 XLH and having to lean the a long way to the right to put the jiffy stand down.
The OEM kickstand was replaced with a Hugger (advertised 1“ shorter than stock).
This aluminum round stock was cut down on a lathe as an extension.
Worked on concrete, asphalt, dirt and grass (did sink in slightly on the grass, but no problem).
A wedged nut on the bottom holds it to the Jiffy stand. 1) | ||
Kickstand Extension:
2)
1)
photos bu AussieGazza of the XLFORUM http://xlforum.net/forums/showthread.php?t=197065
2)
photo by Toejam503 of the XLFORUM http://xlforum.net/forums/showthread.php?p=5712103&highlight=heel+toe#post5712103