Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
techtalk:ref:carb01z [2019/09/08 21:50] – hippysmacktechtalk:ref:carb01z [2019/09/08 21:53] (current) – [How to adjust the carb for all throttle positions] hippysmack
Line 2: Line 2:
 ====== REF: Carburetor, Intake Manifold & Exhaust - Sub-01Z ====== ====== REF: Carburetor, Intake Manifold & Exhaust - Sub-01Z ======
 \\ \\
-====== How to adjust the carb for all throttle positions ======+====== How to adjust the Lake Injector for all throttle positions ======
  
     * Tools needed: Screwdriver, #16 nail sharpened, small jar, syringe or breaker graduated in cc's or ounces, gloves, small wood throttle blocks (you'll make these), fire extinguisher rated for fuel.      * Tools needed: Screwdriver, #16 nail sharpened, small jar, syringe or breaker graduated in cc's or ounces, gloves, small wood throttle blocks (you'll make these), fire extinguisher rated for fuel. 

Trace: • IH: Carburetor, Intake Manifold & Exhaust - Sub-01L