Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
techtalk:evo:engmech02c [2022/09/05 06:46] hippysmack [Hydraulic Lifter - Mechanical and Hydraulic Operation] |
techtalk:evo:engmech02c [2022/09/07 18:09] hippysmack ↷ Links adapted because of a move operation |
||
---|---|---|---|
Line 14: | Line 14: | ||
Examining internal lifter oil paths from the lifter bore to the rocker arms will show some of these dynamics. \\ | Examining internal lifter oil paths from the lifter bore to the rocker arms will show some of these dynamics. \\ | ||
- | {{:techtalk:ref:oil:1991-1999_sportster_lifter_body_internals_by_hippysmack.jpg?direct&400|}} ((photo by Hippysmack)) {{:techtalk:ref:oil:1991-1999_sportster_lifter_cutaway_by_hippysmack.jpg?direct&400|}} ((photo by Hippysmack)) \\ | + | {{techtalk:evo:engmech:1991-1999_sportster_lifter_body_internals_by_hippysmack.jpg?direct&400|}} ((photo by Hippysmack)) {{techtalk:evo:engmech:1991-1999_sportster_lifter_cutaway_by_hippysmack.jpg?direct&400|}} ((photo by Hippysmack)) \\ |
\\ | \\ | ||
Line 35: | Line 35: | ||
In the drawing below, dims were taken from a 1998 1200S lifter and bore showing that oil feed is never blocked to the lifter. \\ | In the drawing below, dims were taken from a 1998 1200S lifter and bore showing that oil feed is never blocked to the lifter. \\ | ||
The cams are Andrews N-4s so actual lift may vary. However, the feed hole in the bore should be the same for at least 1991-1999 Sportsters. \\ | The cams are Andrews N-4s so actual lift may vary. However, the feed hole in the bore should be the same for at least 1991-1999 Sportsters. \\ | ||
- | {{:techtalk:ref:oil:1998_sportster_lifter_to_bore_feed_hole_relationship_by_hippysmack.png?direct&500|}} ((drawing by Hippysmack)) \\ | + | {{:techtalk:evo:engmech:1998_sportster_lifter_to_bore_feed_hole_relationship_by_hippysmack.png?direct&500|}} ((drawing by Hippysmack)) \\ |
====== Oil to the plunger reservoir ====== | ====== Oil to the plunger reservoir ====== | ||
Line 59: | Line 59: | ||
The plunger is free to rotate invariably both during assembly and when not under load. \\ | The plunger is free to rotate invariably both during assembly and when not under load. \\ | ||
- | {{:techtalk:evo:oil:1991-up_sportster_lifter_anatomy_by_hippysmack.png?direct&500|}} ((drawing by Hippysmack)) \\ | + | {{techtalk:evo:engmech:1991-up_sportster_lifter_anatomy_by_hippysmack.png?direct&500|}} ((drawing by Hippysmack)) \\ |
====== Role of the check disc ====== | ====== Role of the check disc ====== | ||
Line 74: | Line 74: | ||
The downward force of oil in the plunger reservoir opens the check disc toward the lower chamber. \\ | The downward force of oil in the plunger reservoir opens the check disc toward the lower chamber. \\ | ||
The (now open bottom) plunger is moving down into the lower chamber filled with oil. \\ | The (now open bottom) plunger is moving down into the lower chamber filled with oil. \\ | ||
- | Some of the oil in the lower chamber is squeezed up past the open check disc into the plunger reservoir. \ | + | Some of the oil in the lower chamber is squeezed up past the open check disc into the plunger reservoir. \\ |
With the check disc open, the lower chamber volume decreases as the plunger is continuously forced toward it by increasing engine valve spring pressure. \\ | With the check disc open, the lower chamber volume decreases as the plunger is continuously forced toward it by increasing engine valve spring pressure. \\ | ||
This increases oil pressure in the lower chamber forcing the check disc to close toward the plunger. \\ | This increases oil pressure in the lower chamber forcing the check disc to close toward the plunger. \\ | ||
Line 105: | Line 105: | ||
And the pressure chamber is what actually raises the engine valves. | And the pressure chamber is what actually raises the engine valves. | ||
- | {{:techtalk:ref:oil:1991-up_sportster_lifter_pushrod_cup_by_hippysmack.png?direct&500|}} ((drawing by Hippysmack)) \\ | + | {{techtalk:evo:engmech:1991-up_sportster_lifter_pushrod_cup_by_hippysmack.png?direct&500|}} ((drawing by Hippysmack)) \\ |