Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
techtalk:evo:elec03 [2024/03/31 01:34] ixl2relax [Turn Signal Basic Functions] |
techtalk:evo:elec03 [2024/04/10 14:40] (current) ixl2relax [Tail Light, Brake Light and License Light] |
||
|---|---|---|---|
| Line 557: | Line 557: | ||
| **2003L-later** - Mid-year of 2003 there was a change to a wedge type bulb (P/N 68167-88). Generically, it is know as a #3157 bulb. Later, the HD bulb P/N was changed (P/N 68167-04), but the same generic #3157 bulb is compatible. The physical mounting socket is a twist-lock type that mounts on the lens with a short cable (P/N 68370-03A) that plugs into the distribution circuit board. | **2003L-later** - Mid-year of 2003 there was a change to a wedge type bulb (P/N 68167-88). Generically, it is know as a #3157 bulb. Later, the HD bulb P/N was changed (P/N 68167-04), but the same generic #3157 bulb is compatible. The physical mounting socket is a twist-lock type that mounts on the lens with a short cable (P/N 68370-03A) that plugs into the distribution circuit board. | ||
| - | **2011 - later** - All Custom model Sportsters received a new, self-contained, LED Tail Light assembly (P/N 69352-11A). The LEDs are integrated into the lens assembly and cannot be replaced separately. Non-Custom Sportster models thru 2020 (with a center tail light) continued to use the distribution circuit board & the #3157 type bulb. Other Sportster models implemented brake lighting using the LED Turn Signals and had no center tail light. | + | **2011-later** - All Custom model Sportsters received a new, self-contained, LED Tail Light assembly (P/N 69352-11A). The LEDs are integrated into the lens assembly and cannot be replaced separately. Non-Custom Sportster models thru 2020 (with a center tail light) continued to use the distribution circuit board & the #3157 type bulb. Other Sportster models implemented brake lighting using the LED Turn Signals and had no center tail light. |
| + | |||
| + | **2014-2020** - The under-fender wiring was changed when the CANbus controllers were implemented. Two wiring colors changed and causes some confusion because the wire that is RED/Yellow color is used differently in those years. The other four wiring colors & functions remained the same (into the same version distribution circuit board). | ||
| + | |||
| + | | Under-fender Wiring || Wire Color | Function | | ||
| + | | 1999-2013 | Pin1 | ORANCE/White | Power From Accessory Fuse | | ||
| + | | ::: | Pin4 | RED/Yellow | Power From Brake Lever(s) | | ||
| + | | 2014-2020 | Pin1 | RED/Yellow | Power From BCM (Accy Circuit) | | ||
| + | | ::: | Pin4 | BLUE/Red | Power From BCM (for Brake Light) | | ||
| \\ | \\ | ||
