Differences

This shows you the differences between two versions of the page.

--- techtalk:ref:oil22 [2022/07/08 23:34]
hippysmack [Static Pressure Testing]
+++ techtalk:ref:oil22 [2024/04/11 04:21] (current)
hippysmack [Measuring Output Volume (flow rate) of a Gerotor Oil Pump]
@@ Line 2: / Line 2: @@
 ====== REF: Oiling & Lubrication ======
 ====== Measuring Output Volume (flow rate) of a Gerotor Oil Pump ======
+See also [[techtalk:ref:oil24|Measuring Feed Oil Volume (flow rate) of the -72 Gear Type Oil Pump]] in the Sportsterpedia. \\
 \\
 Disregarding variations in internal leakage, a positive displacement pump will discharge a specific volume of fluid per revolution. \\
@@ Line 420: / Line 421: @@
 |  1991-1997 Pump Initial Test Run \\ with Air Leak at Gasket ((video by Hippysmack))  |  1991-1997 Pump Update \\ with Air Leak Stopped ((video by Hippysmack))  |  1998-2006 Pump Initial Test Run ((video by Hippysmack))  |
-|{{:video:oil_pump_flow_testing_video-_equipment_rig_mp4_by_hippysmack.mp4|Oil Pump Flow Testing Rig Test 1}}|{{:video:oil_pump_flow_testing_video-_equipment_rig_update_mp4_by_hippysmack.mp4|Oil Pump Flow Testing Rig Test 2}} ((video by Hippysmack))|{{:techtalk:ref:oil:oil_pump_flow_testing_video-_1998-2006_pump_initial_run_by_hippysmack.mp4|}}|
+|{{video:100-oil_pump_flow_testing_-_equipment_rig_mp4_by_hippysmack.mp4|Oil Pump Flow Testing Rig Test 1}}|{{video:100-oil_pump_flow_testing_-_equipment_rig_update_mp4_by_hippysmack.mp4|Oil Pump Flow Testing Rig Test 2}} ((video by Hippysmack))|{{:techtalk:ref:oil:oil_pump_flow_testing_video-_1998-2006_pump_initial_run_by_hippysmack.mp4|}}|
 ===== Bench Runs of Normal Operation =====
@@ Line 436: / Line 437: @@
 |  1991-1997 Sportster Oil Pump Bench Run ((video by Hippysmack))  |
-|{{:video:oil_pump_flow_testing_video-_1991-1997_bench_run_by_hippysmack.mp4|1991-1997 Oil Pump Bench Test Run}}|
+|{{video:100-oil_pump_flow_testing_-_1991-1997_bench_run_by_hippysmack.mp4|1991-1997 Oil Pump Bench Test Run}}|
 ===== Flow Rate Result Summaries =====
@@ Line 465: / Line 466: @@
 |  Screenshot at the 1 minute mark (660.3 RPM) ((photo by Hippysmack))  |  Video: Feed Volume at 660.3 RPM  ((video by Hippysmack))  |
-|{{:techtalk:ref:oil:oil_pump_flow_testing_video-_1991-1997_feed-test_screenshot_at_660.3_rpm_by_hippysmack.jpg?direct&400|}}|{{:video:oil_pump_flow_testing_video-_1991-1997_feed-test_at_660.3_rpm_by_hippysmack.mp4|}}|
+|{{:techtalk:ref:oil:oil_pump_flow_testing_video-_1991-1997_feed-test_screenshot_at_660.3_rpm_by_hippysmack.jpg?direct&400|}}|{{video:100-oil_pump_flow_testing_-_1991-1997_feed-test_at_660.3_rpm_by_hippysmack.mp4|}}|
 === Return Testing ===
@@ Line 480: / Line 481: @@
 |  Screenshot at the 1 minute mark ((photo by Hippysmack))  |  Video: Return Volume at 660.3 RPM  ((video by Hippysmack))  |
-|{{:techtalk:ref:oil:oil_pump_flow_testing_video-_1991-1997_return-test_screenshot_at_660.3_rpm_by_hippysmack.jpg?direct&400|}}|{{:video:oil_pump_flow_testing_video-_1991-1997_return-test_at_660.3_rpm_by_hippysmack.mp4|}}|
+|{{:techtalk:ref:oil:oil_pump_flow_testing_video-_1991-1997_return-test_screenshot_at_660.3_rpm_by_hippysmack.jpg?direct&400|}}|{{video:100-oil_pump_flow_testing_-_1991-1997_return-test_at_660.3_rpm_by_hippysmack.mp4|}}|
 ==== 1998-2006 Oil Pump Flow Test ====
@@ Line 488: / Line 489: @@
 |  Video: 1998-2006 Feed Volume at 660.3 RPM ((video by Hippysmack))  |
-|{{:video:oil_pump_flow_testing_video-_1998-2006_feed_volume_test_by_hippysmack.mp4|}}|
+|{{video:100-oil_pump_flow_testing_-_1998-2006_feed_volume_test_by_hippysmack.mp4|}}|
 === Return Testing ===
@@ Line 510: / Line 511: @@
 |  1998-2006 Return Test Video \\ Both Ports Delivering Oil ((video by Hippysmack))  |
-|{{:video:oil_pump_flow_testing_video-_1998-2006_return_inlet_test-_both_ports_by_hippysmack.mp4|}}|
+|{{video:100-oil_pump_flow_testing_-_1998-2006_return_inlet_test-_both_ports_by_hippysmack.mp4|}}|
 |  1998-2006 Return Test Video \\ Sump Port (only) Delivering Oil ((video by Hippysmack))  |1998-2006 Return Test Video \\ Cam Port (only) Delivering Oil ((video by Hippysmack))|
-|{{:video:oil_pump_flow_testing_video-_1998-2006_return_inlet_test-_sump_port_w_cam_port_open_by_hippysmack.mp4|}}|{{:video:oil_pump_flow_testing_video-_1998-2006_return_inlet_test-_cam_port-_w_sump_port_open_by_hippysmack.mp4|}}|
+|{{video:100-oil_pump_flow_testing_-_1998-2006_return_inlet_test-_sump_port_w_cam_port_open_by_hippysmack.mp4|}}|{{video:100-oil_pump_flow_testing_-_1998-2006_return_inlet_test-_cam_port-_w_sump_port_open_by_hippysmack.mp4|}}|
+==== 2007-Present Oil Pump Flow Test ====
+=== Feed Testing ===
+**Actual Pump Feed Flow Test**: \\
+The video below shows about 30 ounces per minute into the container at 654.7 RPM. \\
+|  Video: 2007-Present Feed Volume at 654.7 RPM ((video by Hippysmack))  |
+|{{video:100-oil_pump_flow_testing_-_2007-present_feed-test_at_654.7_rpm_by_hippysmack.mp4|}}|
+=== Return Testing ===
+**Actual Pump Return Flow Test**: \\
+Flow testing was attempted to measure volume of the sump inlet port (cam port open to atmosphere) and cam inlet port (sump port open to atmosphere). \\
+  * The cam port volume could not be tested due to not enough oil being delivered to it. \\ First, the container of oil for the cam chest inlet was hung above the drill press where the inlet hose was 25-1/2" above the pump (oil level 28" above pump). \\ The oil pump had more suction than the weight of gravity oil (more suction than gravity could deliver oil for). \\ Next, the container was raised to where the inlet fitting was 34-1/2" above the pump with the oil level at 39" above. \\ The oil pump was still sucking faster than the oil was being delivered to the top of the pump.
+  * The sump port alone delivered about 63 ounces per minute into the container at 654.7 RPM.
+|  Video: 2007-Present Cam Chest Inlet Test- \\ (not enough oil delivery for testing) ((video by Hippysmack))  |  Video: 2007-Present Sump Inlet Test ((video by Hippysmack))  |
+|{{video:100-oil_pump_flow_testing_-_2007-present_return-_cam_chest_inlet_at_654.7_rpm_by_hippysmack.mp4|}}|{{video:100-oil_pump_flow_testing_-_2007-present_return-_sump_inlet_at_654.7_rpm_by_hippysmack.mp4|}}|
 ===== Further Testing Attempted =====
 ==== Feed Pressure Testing ====
@@ Line 521: / Line 538: @@
 |  1991-1997 Oil Pump- Restrictions Video ((video by Hippysmack))  |
-|{{:video:oil_pump_flow_testing_video-_1991-1997_restricted_feed_test_by_hippysmack.mp4|}}|
+|{{video:100-oil_pump_flow_testing_-_1991-1997_restricted_feed_test_by_hippysmack.mp4|}}|
 ==== Static Pressure Testing ====
@@ Line 535: / Line 552: @@
   * 1998-1999 oil pump static pressures:
     * Test at pump speed of 653.7 RPM and feed outlet fitting ID of 0.316"; \\ Feed Outlet Hose Pressure (4 PSI), Feed Inlet Hose Vacuum (-14.5 cmHg or -2.80 PSI), \\ Return Inlet Hose Vacuum __Without__ Oil in the Cam Chest Inlet Port (-11 cmHG or -2.13 PSI) \\ Return Inlet Hose Vacuum __With__ Oil in the Cam Chest Inlet Port (-12.5 cmHG or -2.42 PSI)
+  * 2007-Present oil pump static pressures:
+    * Test at pump speed of 654.7 RPM and feed outlet fitting ID of 0.316"; \\ Feed Outlet Hose Pressure (4 PSI), Feed Inlet Hose Vacuum (-14 cmHg or -2.71 PSI), \\ Return Inlet Hose Vacuum __Without__ Oil in the Cam Chest Inlet Port (-11 cmHG or -2.13 PSI) \\ Return Inlet Hose Vacuum __With__ Oil in the Cam Chest Inlet Port not tested.
+|  1991-1997 Pump Pressure Test #1  ||
-|  1991-1997 Pressure Test #1  ||
 |{{:techtalk:ref:oil:oil_pump_flow_testing-_1991-1997_feed-test_pressure_pic1_by_hippysmack.jpg?direct&400|}}|{{:techtalk:ref:oil:oil_pump_flow_testing-_1991-1997_feed-test_pressure_pic1.1_by_hippysmack.jpg?direct&400|}}|
-|  1991-1997 Pressure Test #2  ||
+|  1991-1997 Pump Pressure Test #2  ||
 |{{:techtalk:ref:oil:oil_pump_flow_testing-_1991-1997_feed-test_pressure_pic2_by_hippysmack.jpg?direct&400|}}|{{:techtalk:ref:oil:oil_pump_flow_testing-_1991-1997_feed-test_pressure_pic2.1_by_hippysmack.jpg?direct&400|}}|
-|  1991-1997 Pressure Test #3  ||
+|  1991-1997 Pump Pressure Test #3  ||
 |{{:techtalk:ref:oil:oil_pump_flow_testing-_1991-1997_feed-test_pressure_pic3_by_hippysmack.jpg?direct&400|}}|{{:techtalk:ref:oil:oil_pump_flow_testing-_1991-1997_feed-test_pressure_pic3.1_by_hippysmack.jpg?direct&400|}}|
-|  1991-1997 Pressure Test #4  |  1991-1997 Pressure Test #5  |
+|  1991-1997 Pump Pressure Test #4  |  1991-1997 Pump Pressure Test #5  |
 |{{:techtalk:ref:oil:oil_pump_flow_testing-_1991-1997_feed-test_pressure_pic4_by_hippysmack.jpg?direct&400|}}|{{:techtalk:ref:oil:oil_pump_flow_testing-_1991-1997_feed-test_pressure_pic5_by_hippysmack.jpg?direct&400|}}|
-|  1991-1997 Pressure Test #6  |  1991-1997 Pressure Test #7  |
+|  1991-1997 Pump Pressure Test #6  |  1991-1997 Pump Pressure Test #7  |
 |{{:techtalk:ref:oil:oil_pump_flow_testing-_1991-1997_feed-test_pressure_pic6_by_hippysmack.jpg?direct&400|}}|{{:techtalk:ref:oil:oil_pump_flow_testing-_1991-1997_feed-test_pressure_pic7_by_hippysmack.jpg?direct&400|}}|
+|  1998-2006 Pump Feed Pressure Test  |  1998-2006 Pump Return (sump hose) Pressure Test  |
+|{{:techtalk:ref:oil:oil_pump_flow_testing-_1998_pump_-_feed_hose_vacuum_and_pressure_by_hippysmack.jpg?direct&400|}} |{{:techtalk:ref:oil:oil_pump_flow_testing-_1998_pump_-_sump_hose_vacuum_with-without_cam_chest_oil_by_hippysmack.jpg?direct&400|}}|
+|  2007 Pump Feed Pressure Test  |  2007 Pump Return (sump hose) Pressure Test  |
+|{{:techtalk:ref:oil:oil_pump_flow_testing-_2007_pump_-_feed_hose_vacuum_and_pressure_by_hippysmack.jpg?direct&400|}}|{{:techtalk:ref:oil:oil_pump_flow_testing-_2007_pump_-_return-_sump_only_vacuum_by_hippysmack.jpg?direct&400|}}|
 ==== Return Inlet Restrictions ====
@@ Line 570: / Line 594: @@
 |  77-97 pump return inlet volume per restriction video ((video by Hippysmack))  |  77-97 pump return inlet restriction/RPM/Cavitation video ((video by Hippysmack))  |
-|{{:video:oil_pump_flow_testing_video-_1991-1997_return_inlet_test-_restrictions_and_volume_by_hippysmack_w_aac_audio.mp4|}}|{{:video:oil_pump_flow_testing_video-_1991-1997_return_inlet_test-_restriction-rpm-cavitation_by_hippysmack_use_this.mp4|}}|
+|{{video:100-oil_pump_flow_testing_-_1991-1997_return_inlet_test-_restrictions_and_volume_by_hippysmack_w_aac_audio.mp4|}}|{{video:100-oil_pump_flow_testing_-_1991-1997_return_inlet_test-_restriction-rpm-cavitation_by_hippysmack_use_this.mp4|}}|
 ==== 1998 Oil Pump Sump Passage Dead Stick Vacuum Test ====
@@ Line 584: / Line 608: @@
 |  1998-2006 Style Pump Video \\ Cam Port Stream Quality ((video by Hippysmack))  |
-|{{:video:oil_pump_flow_testing_video-_1998-2006_return_inlet_test-_cam_port_flooded_w_sump_port_open_then_plugged_by_hippysmack.mp4|}}|
+|{{video:100-oil_pump_flow_testing_-_1998-2006_return_inlet_test-_cam_port_flooded_w_sump_port_open_then_plugged_by_hippysmack.mp4|}}|
 ----

Trace:

Differences

Navigation

Search

Toolbox