Table of Contents
This is an old revision of the document!
REF: Body Parts
Brass Accents For Your Bike
Brass Oil Dipstick
Brass Headlight Bucket
The headlight shell came from an old $3 brass (or brass-plated) lamp at a local thrift store.
With some cutting and grinding, it turned out to be sized just right for the stock Harley headlight and its rubber mounting ring.
A few light coats of Duragloss candy copper paint (translucent) and a couple coats of clear was used on the OEM headlight rims.
Wiring is hidden under the tank.
The mounting bracket was made out of some scrap billet. 2)
Brass Brake Pedal Cover
This particular brass cover is made by Kijima in Tokyo.
It was bought from Webike.net in Yokohama. 3)
Shifter Peg
50bmg shifter:
The shoulder of the casing was cut off with a bolt epoxied into it. 4)
Air Cleaner
This is a NRHS round AC with a brass center added. 5)
Hand Grips
1)
photos by Folkie of the XLFORUM http://xlforum.net/forums/showthread.php?t=1767766
2)
photos by Dooce of the XLFORUM http://xlforum.net/forums/showthread.php?t=1709165
3)
photos by Folkie of the XLFORUM http://xlforum.net/forums/showthread.php?t=1714701
4)
photos by DaytonaSportster of the XLFORUM http://xlforum.net/forums/showthread.php?t=1182952&page=3
5)
photos by Folkie of the XLFORUM http://xlforum.net/forums/showthread.php?t=1051311&page=3
6)
photo by Stairman of the XLFORUM http://xlforum.net/forums/showthread.php?t=2071635&highlight=heel+toe&page=2