Differences

This shows you the differences between two versions of the page.

--- techtalk:evo:engmech07 [2023/12/26 20:23] – hippysmack
+++ techtalk:evo:engmech07 [2024/12/06 21:08] (current) – [Sub Documents] hippysmack
@@ Line 203: / Line 203: @@
 == 1991-2003 ==
--03 breather bolts. \\ Outside threads are 1/2" x 13 (hole through the middle is 5/6" nominal). \\
+-03 breather bolts. \\ Outside threads are 1/2" x 13 (hole through the middle is 5/16" nominal). \\
 {{:techtalk:evo:carb:91-03_breather_bolts_1_by_hippysmack.jpg?direct&300|}} ((photo by Hippysmack)) {{:techtalk:evo:carb:91-03_breather_bolts_2_by_hippysmack.jpg?direct&300|}} ((photo by Hippysmack))
@@ Line 212: / Line 212: @@
 They also allow the air to leave the vents at a faster rate. \\
-+ breather bolts. \\ Outside threads are 1/2" x 13 (2 different sizes thru the middle - nominally 1/16" (1.5875 mm) in the rear and 5/16" in the front). ((tomcat of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-motor-engine/sportster-motorcycle-bottom-end/197307-sportster-crankcase-pressure-engine-breathing-wetsumping-and-mods/page19?t=2073932&page=19)) ((Folkie of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-motor-engine/sportster-motorcycle-bottom-end/197307-sportster-crankcase-pressure-engine-breathing-wetsumping-and-mods/page22?t=2073932&page=22)) ((https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-intake-and-exhaust/sportster-motorcycle-air-intake-carburetor-efi-fuel-and-exhaust/28874-stock-air-cleaner-box-modifications/page20#post4310316)) \\
++ breather bolts. \\ Outside threads are 1/2" x 13 (2 different sizes thru the middle - nominally 1/16" (1.5875 mm) in the rear and 5/16" in the front). ((tomcatt of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-motor-engine/sportster-motorcycle-bottom-end/197307-sportster-crankcase-pressure-engine-breathing-wetsumping-and-mods/page19?t=2073932&page=19)) ((Folkie of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-motor-engine/sportster-motorcycle-bottom-end/197307-sportster-crankcase-pressure-engine-breathing-wetsumping-and-mods/page22?t=2073932&page=22)) ((https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-intake-and-exhaust/sportster-motorcycle-air-intake-carburetor-efi-fuel-and-exhaust/28874-stock-air-cleaner-box-modifications/page20#post4310316)) \\
 {{:techtalk:evo:engmech:04_up_breather_bolt_3_by_folkie.jpg?direct&300|}} ((photo by Folkie of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-intake-and-exhaust/sportster-motorcycle-air-intake-carburetor-efi-fuel-and-exhaust/28874-stock-air-cleaner-box-modifications/page20#post4310316)) {{:techtalk:evo:engmech:04_up_breather_bolt_2_by_folkie.jpg?direct&300|}} ((photo by Folkie of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-intake-and-exhaust/sportster-motorcycle-air-intake-carburetor-efi-fuel-and-exhaust/28874-stock-air-cleaner-box-modifications/page20#post4310316))  {{:techtalk:evo:engmech:04_up_breather_bolt_1_by_folkie.jpg?direct&300|}} ((photo by Folkie of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-intake-and-exhaust/sportster-motorcycle-air-intake-carburetor-efi-fuel-and-exhaust/28874-stock-air-cleaner-box-modifications/page20#post4310316))

Trace:

Differences

Navigation

Search

Toolbox