Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
techtalk:evo:transfinal01 [2025/08/14 02:14] – [Final Drive Sprocket - Stripped Splines] hippysmacktechtalk:evo:transfinal01 [2025/08/14 05:06] (current) – [Final Drive Sprocket - Stripped Splines] hippysmack
Line 151: Line 151:
 \\ \\
  
-**Removal**: \\ (Caution: LEFT HAND THREADS ON SPROCKET NUT = CLOCKWISE TO REMOVE) \\+**Removal**: \\ (Caution: 1991-UP MODELS HAVE LEFT HAND THREADS ON SPROCKET NUT = CLOCKWISE TO REMOVE) \\
 The 2 cap screws are right hand thread. Remove them and the metal retaining plate first. Then remove the pully nut. You'll most likely need a breaker bar also if not using an impact wrench to remove the 1-7/8" nut (it takes a lot of torque to break it loose). And you'll need to either lock the transmission from turning or lock the pully from turning to use a breaker bar/socket to remove it. \\ The 2 cap screws are right hand thread. Remove them and the metal retaining plate first. Then remove the pully nut. You'll most likely need a breaker bar also if not using an impact wrench to remove the 1-7/8" nut (it takes a lot of torque to break it loose). And you'll need to either lock the transmission from turning or lock the pully from turning to use a breaker bar/socket to remove it. \\
   * [[techtalk:ref:tools131|Click Here]] to view sprocket tools in the Sportsterpedia.   * [[techtalk:ref:tools131|Click Here]] to view sprocket tools in the Sportsterpedia.

Trace: