Click here for tips on 4 Speed Transmission Removal / Inspection / Installation |
---|
1986-1990 Wet Clutch Information 3) | ||
---|---|---|
Clutch plate thickness | –Friction (drive) plate (fiber) | 0.0150 in. (± 0.0031 in.) / 3.810 mm (± 0.079 mm) |
–Steel plate (driven) plate | 0.0629 in. (± 0.0020 in.) / 1.598 mm (± 0.51 mm) | |
Minimum Thickness (wear limit) | –Friction (fiber) plate | 0.130 in. min. / (3.302 mm) |
–Steel plate | 0.060 in. min. / (0.0254 mm) | |
Maximum allowable warp-age | –Friction (fiber) plate | 0.0010 in. max. / (0.0254 mm) |
–Steel plate | 0.0010 in. max./ (0.0254 mm) | |
Capacity | 174 ft-lbs | |
Spring Force | Engaged: 304 lbs | Disengaged: 260 lbs |
Clutch shell bearing on clutch gear (loose) | 0.0000 in-0.0010 in. / (0.0254 mm) |
Year | Domestic Model(s) | Engine Sprocket | Clutch Sprocket | Ratio |
---|---|---|---|---|
1986-1990 | All Models4) | 34 Teeth | 59 Teeth | 1.676:1 |
The MoCo publishes for 1986-1990 5) | 1.5 pints (24 oz), (710 ml) |
* This quantity is for a dry application. When changing oil, use your own judgement not to overfill as you won't need a full 1.5 pints to re-fill the oil.
Year (all models) Internal Gear Ratios | ||||
---|---|---|---|---|
1st | 2nd | 3rd | 4th | |
1986 | 2.52 | 1.82 | 1.38 | 1.00 |
1987-1990 | 2.29 | 1.66 | 1.25 | 1.00 |
Year (all models) | Overall Gear Ratios | |||
1st | 2nd | 3rd | 4th | |
1986 | 10.00 | 7.25 | 5.48 | 3.97 |
1987-1990 | 9.12 | 6.59 | 4.98 | 3.97 |
1986-1990 Mainshaft Ball Bearing - Used on All Models 6)
Final Drive Sprocket Torque (on Chain Drive Models) | |||
---|---|---|---|
Nut Description | Nut Size | Tightening Torque | Notes |
1986-90 | 1-1/8“ Nut - Right-hand Threads | 35-64 ft-lbs | Max 90ft-lbs |
(use only 2 or 3 drops of RED threadlocker on this nut) |
Year | Domestic Model(s) | Transmission Sprocket | Rear Wheel Sprocket | Ratio |
---|---|---|---|---|
1986-1990 | All Models7) | 21 Teeth | 48 Teeth | 2.29:1 |
Mainshaft nut locking screw | 50 - 60 in-lbs. |
Mainshaft nut | 35 - 65 ft-lbs. |
Engine sprocket nut | 150 - 165 ft-lbs. |
Drain plug | 14 - 21 ft-lbs. |
Front chaincase / primary cover screws | 80 - 110 in-lbs. |
Access \ Trapdoor cover bolts | 14-19 ft-lbs. |
Stator Torx nuts | 30 - 40 in-lbs. |
Footrest nut | 24-36 ft-lbs. |
Shift lever pinch-bolt | 90 - 110 in-lbs. |
Neutral indicator switch | 3 - 5 ft-lbs. |
Chain tensioner stud nut | 8 - 12 ft lbs |
Clutch release mechanism | 22 - 30 in. lbs |
1986-90 Evo Sportsters: What every owner should know but were afraid to ask
An __XLForum Thread__ By Four Speed