Differences

This shows you the differences between two versions of the page.

--- techtalk:ref:body20 [2022/03/09 05:15] – ↷ Page name changed from techtalk:ref:body12 to techtalk:ref:body20 ixl2relax
+++ techtalk:ref:body20 [2024/01/09 17:24] (current) – hippysmack
@@ Line 14: / Line 14: @@
 |{{techtalk:ref:body:ape_hangers_by_brad_1.jpg?direct&200|}} {{techtalk:ref:body:ape_hangers_by_brad_2.jpg?direct&300|}}|
-|1" Ape Hangers ((http://www.bikerparts-superstore.com/handlebars/ape-hangers/chrome-15-inch-ape-hangers-handlebar-for-1982-up-harley)) w/ stock risers on a 2005 XL883C \\ Dims: 33" wide, 15" total rise, 13" rise to grip tip, 14.5" pullback, 10" center width. ((photos courtesy of Brad of the XLFORUM))|
+|1" Ape Hangers ((http://www.bikerparts-superstore.com/handlebars/ape-hangers/chrome-15-inch-ape-hangers-handlebar-for-1982-up-harley)) w/ stock risers on a 2005 XL883C \\ Dims: 33" wide, 15" total rise, 13" rise to grip tip, 14.5" pullback, 10" center width. ((photos courtesy of Brad of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-suspension-frame-forks-handlebars-fuel-tank-oil-tank-fenders/171430-not-apes-or-drags#post3656731))|
 |{{techtalk:ref:body:moto_bar_1_by_brad.jpg?direct&300|}} {{techtalk:ref:body:moto_bar_2_by_brad.jpg?direct&300|}}|
-|1" (black) Moto Bar ((https://www.biltwellinc.com/p181/buy/parts-amp-accessories/handlebars/moto/-moto-handlebars-1-quot-black/#specs)) w/ stock risers and cables on a 2005 XL883 \\ Dims: 31" wide, 4.25" rise, 2.75" pullback, 4.75" center width. ((photos courtesy of Brad of the XLFORUM))|
+|1" (black) Moto Bar ((https://www.biltwellinc.com/p181/buy/parts-amp-accessories/handlebars/moto/-moto-handlebars-1-quot-black/#specs)) w/ stock risers and cables on a 2005 XL883 \\ Dims: 31" wide, 4.25" rise, 2.75" pullback, 4.75" center width. ((photos courtesy of Brad of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-suspension-frame-forks-handlebars-fuel-tank-oil-tank-fenders/171430-not-apes-or-drags#post3656731))|
@@ Line 24: / Line 24: @@
 ==== Spacers ====
-|Done on a 2005 1200R \\  Using 3/4" sockets: a 1/2"x13 nut (3/4" hex) was epoxied in each socket. The threads were then drilled out to 1/2". ((photos by thunderpaw of the XLFORUM http://xlforum.net/forums/showthread.php?postid=1239036))|||
+|Done on a 2005 1200R \\  Using 3/4" sockets: a 1/2"x13 nut (3/4" hex) was epoxied in each socket. The threads were then drilled out to 1/2". ((photos by thunderpaw of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-suspension-frame-forks-handlebars-fuel-tank-oil-tank-fenders/50568-son-of-xena-mod?postid=1239036#post1053555))|||
 |{{:techtalk:ref:body:riser_extensions_4_by_thunderpaw.jpg?direct&300|}}|{{:techtalk:ref:body:riser_extensions_2_by_thunderpaw.jpg?direct&300|}}|{{:techtalk:ref:body:riser_extensions_3_by_thunderpaw.jpg?direct&300|}}|
 ==== Offset Riser Blocks ====
-{{:techtalk:ref:body:offset_riser_mod_7_by_tobiism.jpg?direct&300|}} ((photo by tobiism of the XLFORUM http://xlforum.net/forums/showthread.php?t=906049&page=23))
+{{:techtalk:ref:body:offset_riser_mod_7_by_tobiism.jpg?direct&300|}} ((photo by tobiism of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-styles/cafe-racer-sportster-motorcycle-talk/103339-my-new-1200s-project/page23?t=906049&page=23))
-|Start with some square stock aluminum, drill holes for the bars (7/8" / 1" etc.) and mark center on the outside edge to cut a pinch slot. ((photos by tobiism of the XLFORUM http://xlforum.net/forums/showthread.php?t=906049&page=22))|||
+|Start with some square stock aluminum, drill holes for the bars (7/8" / 1" etc.) and mark center on the outside edge to cut a pinch slot. ((photos by tobiism of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-styles/cafe-racer-sportster-motorcycle-talk/103339-my-new-1200s-project/page22?t=906049&page=22))|||
 |{{:techtalk:ref:body:offset_riser_mod_1_by_tobiism.jpg?direct&300|}}|{{:techtalk:ref:body:offset_riser_mod_2_by_tobiism.jpg?direct&300|}}|{{:techtalk:ref:body:offset_riser_mod_3_by_tobiism.jpg?direct&300|}}|
-|The pinch slot can be cut with a hacksaw. \\ Drill the hole for the pinch bolt, countersink that for a cap head bolt. \\ Drill and countersink the second hole for the mounting bolt to the upper tree. ((photos by tobiism of the XLFORUM http://xlforum.net/forums/showthread.php?t=906049&page=22))|||
+|The pinch slot can be cut with a hacksaw. \\ Drill the hole for the pinch bolt, countersink that for a cap head bolt. \\ Drill and countersink the second hole for the mounting bolt to the upper tree. ((photos by tobiism of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-styles/cafe-racer-sportster-motorcycle-talk/103339-my-new-1200s-project/page22?t=906049&page=22))|||
 |{{:techtalk:ref:body:offset_riser_mod_4_by_tobiism.jpg?direct&300|}}|{{:techtalk:ref:body:offset_riser_mod_5_by_tobiism.jpg?direct&300|}}|{{:techtalk:ref:body:offset_riser_mod_6_by_tobiism.jpg?direct&300|}}|
@@ Line 39: / Line 39: @@
 \\
 [[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]

Trace:

Differences

Navigation

Search

Toolbox