Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
techtalk:ih:oil03j [2025/09/06 18:02] – [Installing 1972-1976 Oil Pump (Complete) on 1971-Earlier Motors] hippysmacktechtalk:ih:oil03j [2025/09/06 18:04] (current) – [Installing 1972-1976 Oil Pump (Complete) on 1971-Earlier Motors] hippysmack
Line 91: Line 91:
   * You can always plug the rear feed fitting on the pump and use the feed fitting on top of the case instead (if you have one). You get the same amount of oil from either connection. Gravity only pushes the oil to the return gears. The return gears are sucking on the oil as well. And you'll never pump more oil than can collect in the gears per rev.     * You can always plug the rear feed fitting on the pump and use the feed fitting on top of the case instead (if you have one). You get the same amount of oil from either connection. Gravity only pushes the oil to the return gears. The return gears are sucking on the oil as well. And you'll never pump more oil than can collect in the gears per rev.  
  
-{{:techtalk:ih:oil:AAA1957-1971_xl_case_mod_for_1972-1976_oil_pump_compiled_by_hippysmack.jpg?direct&400|}} ((compilation by Hippysmack)) {{:techtalk:ih:oil:1971-earlier_case_mod_for_-72_oil_pump_by_thefrenchowl.jpg?direct&300|}} ((photo by thefrenchowl of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/203717-brought-a-dragbike-that-s-been-sitting-20-years/page6#post4564967)) \\+{{:techtalk:ih:oil:1957-1971_xl_case_mod_for_1972-1976_oil_pump_compiled_by_hippysmack.jpg?direct&400|}} ((compilation by Hippysmack)) {{:techtalk:ih:oil:1971-earlier_case_mod_for_-72_oil_pump_by_thefrenchowl.jpg?direct&300|}} ((photo by thefrenchowl of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/203717-brought-a-dragbike-that-s-been-sitting-20-years/page6#post4564967)) \\
  
 ====== 1977-Up Gerotor Oil Pump on 1976-Earlier Cases ====== ====== 1977-Up Gerotor Oil Pump on 1976-Earlier Cases ======

Trace: • IH: Carburetor, Intake Manifold & Exhaust - Sub-01P