Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |||
| techtalk:ih:engmech07 [2024/11/24 18:10] – [Crankcase Ventilation] hippysmack | techtalk:ih:engmech07 [2025/08/01 19:23] (current) – [L1984-1990 Breather Valve] hippysmack | ||
|---|---|---|---|
| Line 200: | Line 200: | ||
| * The generator was moved and an oil filter was mounted in it's place. The oil slinger system was deleted for L84-up models. | * The generator was moved and an oil filter was mounted in it's place. The oil slinger system was deleted for L84-up models. | ||
| * The crankcase breather valve was redesigned to incorporate a baffle tube assembly (26917-84) with a rubber umbrella valve inside it. | * The crankcase breather valve was redesigned to incorporate a baffle tube assembly (26917-84) with a rubber umbrella valve inside it. | ||
| + | * The plastic assembly is just pushed in with no other locking mechanisms. It is removed by pulling it out although it may be a tight pull. | ||
| The pic on the left shows the breather line coming out at the 10 o' | The pic on the left shows the breather line coming out at the 10 o' | ||
