Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| techtalk:ih:engctl01a [2023/12/31 17:31] – [Auto Advance / Breaker Weight Springs] hippysmack | techtalk:ih:engctl01a [2025/07/28 22:42] (current) – [Breaker Points Seal] hippysmack | ||
|---|---|---|---|
| Line 87: | Line 87: | ||
| ==== Manual Advance Dual Point Circuit Breaker ==== | ==== Manual Advance Dual Point Circuit Breaker ==== | ||
| ====== Internal Circuit Breaker (71-78) ====== | ====== Internal Circuit Breaker (71-78) ====== | ||
| + | ===== Breaker Points Seal ===== | ||
| + | This is a steel shell radial shaft seal (HD# 11124) installed in the cam cover. \\ | ||
| + | It surrounds and seals #2 cam when the cover is installed. Also used on 1986-2003 model Sportster cam covers. \\ | ||
| + | Dims per XLForum member, Fizzle: \\ | ||
| + | OD 1.570" (39.878mm) | ||
| + | ID 1.050" (26.67mm) | ||
| + | W 0.248" (6.2992mm) | ||
| + | |||
| + | Other brands include James (JGI-11124), | ||
| + | The rubber shell HD Genuine double lip version is part number (11124-DL). \\ | ||
| + | Other brands include James (JGI-11124-DL). \\ | ||
| + | **NOTE**: __SKF makes a radial shaft seal with a part number of 11124 but that IS NOT AN HD PART NUMBER__. \\ | ||
| + | SKF 11124 IS TOO BIG TO FIT THE COVER and they don't show a compatible seal in their catalog for this application. \\ | ||
| + | |||
| + | HD Seal (11124): \\ | ||
| + | |||
| + | {{: | ||
| ===== Roll Pin ===== | ===== Roll Pin ===== | ||
| AKA "split pins". These are hollow pins that have a split in them and are held in holes by their own spring tension. ((needspeed of the XLFORUM https:// | AKA "split pins". These are hollow pins that have a split in them and are held in holes by their own spring tension. ((needspeed of the XLFORUM https:// | ||
