Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
techtalk:ref:tools803 [2022/09/28 02:35]
hippysmack [Carburetor, Intake Manifold and Air Cleaner]
techtalk:ref:tools803 [2024/01/24 23:27] (current)
hippysmack
Line 15: Line 15:
   * Some books show a part extending past the end date for that part's use and is corrected in later year parts books.   * Some books show a part extending past the end date for that part's use and is corrected in later year parts books.
   * Most importantly,​ the parts books show what parts were available at the time the book was written. \\ If a part had a design change and retro'​d to earlier years, the newer parts for the updated one will be shown instead of the original ones. \\ Likewise, occasionally there are part numbers for bolts / screws for the same application. \\ It sometimes depends on if you are using the original or an updated part that may require a shorter or longer fastener than the original part required.   * Most importantly,​ the parts books show what parts were available at the time the book was written. \\ If a part had a design change and retro'​d to earlier years, the newer parts for the updated one will be shown instead of the original ones. \\ Likewise, occasionally there are part numbers for bolts / screws for the same application. \\ It sometimes depends on if you are using the original or an updated part that may require a shorter or longer fastener than the original part required.
- 
  
 ===== Pins ===== ===== Pins =====
Line 90: Line 89:
 |42269-30|1975-1976|1/​4"​ x 13/16" Pin|Shifter Shaft (splined) Lever Pin|XLH, XLCH| |42269-30|1975-1976|1/​4"​ x 13/16" Pin|Shifter Shaft (splined) Lever Pin|XLH, XLCH|
 |42368-79|1979|Pin|Rear Brake Clevis Pin|XL, XLCH, XLS| |42368-79|1979|Pin|Rear Brake Clevis Pin|XL, XLCH, XLS|
-|42423-52|1952-1974|Pin|Foot Lever Spring Pin|K Models, Sportsters|+|42423-52|1952-1974|Pin|Foot Lever Spring Pin|K Models, Sportsters|{{:​techtalk:​ref:​tools:​1952-1974_k_models_-_sportster_foot_lever_spring_pin_42423-52_by_bikersnos.jpg?​linkonly|Pic1}} ((photo courtesy of BIKERSNOS.com. [[https://​www.ebay.com/​str/​bikersnos?​_trksid=p2047675.m3561.l2563|Link to Ebay Store]] ))|
 |42447-80|E1980-1981|Pin|Brake Pedal to Master Cylinder \\ Rod Thru Pin|XL, XLS| |42447-80|E1980-1981|Pin|Brake Pedal to Master Cylinder \\ Rod Thru Pin|XL, XLS|
 |42460-80A|L1980-E1987|Clevis Pin|Rear Master Cylinder Clevis Pin \\ (use with 515 cotter pin)|Sportsters| |42460-80A|L1980-E1987|Clevis Pin|Rear Master Cylinder Clevis Pin \\ (use with 515 cotter pin)|Sportsters|
Line 378: Line 377:
 ^{{techtalk:​miscres:​instruction_sheet_header_4.png?​nolink&​850|}}|||||| ^{{techtalk:​miscres:​instruction_sheet_header_4.png?​nolink&​850|}}||||||
 |HD Part#​|Year(s) \\ Available|Description|Uses|Models|Pic(s)| |HD Part#​|Year(s) \\ Available|Description|Uses|Models|Pic(s)|
-|652|1980-1983|3/​8"​ Metal Plug|Crankpin Plug|XL, XLS|+|652|1980-1983|3/​8"​ Metal Welch Plug|Crankpin Plug|XL, XLS|
 |662|1958-1965|3/​8"​ x 1/2" Allen Head Plug|Gas Tank Drain Plug|XLC, XLCH| |662|1958-1965|3/​8"​ x 1/2" Allen Head Plug|Gas Tank Drain Plug|XLC, XLCH|
 |704|1958-1961 \\ 1966-1978 \\ 1979-1981|5/​8"​ x 18 x 3/8" Plug w/ \\ 3/4" Hex Head|Oil Tank Drain Plug|XLCH \\ \\ XLH, XLCH, XLS|{{:​techtalk:​ref:​oil:​fitting_704_timing_hole-oil_drain_plug_704_by_sum-body1_pic1.jpg?​linkonly|Pic1}} ((photo courtesy of Ebay seller, Sum-body'​s Harley Parts, [[https://​www.ebay.com/​str/​sumbodysharleyparts|Link to Ebay Store]] ))\\ {{:​techtalk:​ref:​oil:​fitting_704_timing_hole-oil_drain_plug_704_by_sum-body1_pic2.jpg?​linkonly|Pic2}} ((photo courtesy of Ebay seller, Sum-body'​s Harley Parts, [[https://​www.ebay.com/​str/​sumbodysharleyparts|Link to Ebay Store]] ))| |704|1958-1961 \\ 1966-1978 \\ 1979-1981|5/​8"​ x 18 x 3/8" Plug w/ \\ 3/4" Hex Head|Oil Tank Drain Plug|XLCH \\ \\ XLH, XLCH, XLS|{{:​techtalk:​ref:​oil:​fitting_704_timing_hole-oil_drain_plug_704_by_sum-body1_pic1.jpg?​linkonly|Pic1}} ((photo courtesy of Ebay seller, Sum-body'​s Harley Parts, [[https://​www.ebay.com/​str/​sumbodysharleyparts|Link to Ebay Store]] ))\\ {{:​techtalk:​ref:​oil:​fitting_704_timing_hole-oil_drain_plug_704_by_sum-body1_pic2.jpg?​linkonly|Pic2}} ((photo courtesy of Ebay seller, Sum-body'​s Harley Parts, [[https://​www.ebay.com/​str/​sumbodysharleyparts|Link to Ebay Store]] ))|
Line 396: Line 395:
 |24575-52|1958-1972|11/​16"​ x 20 Hex Head Plug|Speedometer Hole - Case Plug|XLC, XLCH|{{ :​techtalk:​ih:​elec:​1958-1972_xlch_speedometer_hole_plug_24575-52_by_57harleyrider.jpg?​linkonly |Pic1}} ((photo courtesy of Ebay seller, 57harleyrider. [[https://​www.ebay.com/​str/​57harleyrider|Link to Ebay Store]] ))| |24575-52|1958-1972|11/​16"​ x 20 Hex Head Plug|Speedometer Hole - Case Plug|XLC, XLCH|{{ :​techtalk:​ih:​elec:​1958-1972_xlch_speedometer_hole_plug_24575-52_by_57harleyrider.jpg?​linkonly |Pic1}} ((photo courtesy of Ebay seller, 57harleyrider. [[https://​www.ebay.com/​str/​57harleyrider|Link to Ebay Store]] ))|
 |24576-52|1952- |Straight Solid Metal Plug|Right Crankcase Oil Hole Plug|K Models, Sportsters| |24576-52|1952- |Straight Solid Metal Plug|Right Crankcase Oil Hole Plug|K Models, Sportsters|
-|24577-68|1968-1980|Metal Plug|Kicker Shaft Hole Plug|XL, XLH, XLS|{{ :​techtalk:​ref:​oil:​fitting_24577-68_kicker_hole_plug_by_57harleyrider.jpg?​linkonly |Pic1}} ((photos courtesy of Ebay seller, 57harleyrider. [[https://​www.ebay.com/​str/​57harleyrider|Link to Ebay Store]] )) \\ {{ :​techtalk:​ref:​oil:​fitting_24577-68_kicker_hole_plug_by_74_xlh_winchester_va.jpg?​linkonly |Pic2}} ((photo by 74_XLH_WINCHESTER_VA of the XLFORUM ​http://​xlforum.net/​forums/showthread.php?​threadid=727978))|+|24577-68|1968-1980|Metal Plug|Kicker Shaft Hole Plug|XL, XLH, XLS|{{ :​techtalk:​ref:​oil:​fitting_24577-68_kicker_hole_plug_by_57harleyrider.jpg?​linkonly |Pic1}} ((photos courtesy of Ebay seller, 57harleyrider. [[https://​www.ebay.com/​str/​57harleyrider|Link to Ebay Store]] )) \\ {{ :​techtalk:​ref:​oil:​fitting_24577-68_kicker_hole_plug_by_74_xlh_winchester_va.jpg?​linkonly |Pic2}} ((photo by 74_XLH_WINCHESTER_VA of the XLFORUM ​https://www.xlforum.net/​forum/sportster-motorcycle-forum/​sportster-motorcycle-era-specific-and-model-specific/​ironhead-sportster-motorcycle-talk-1957-1985/​90145-kicker-install-on-a-74-xlh?​threadid=727978))|
 |:::|HD genuine replacement plug is knurled on the outside.||||:::​| |:::|HD genuine replacement plug is knurled on the outside.||||:::​|
-|25221-77|1979-E1981|Rubber Plug|Gearcase Cover Bumper Stem|XL, XLS|+|25221-77|1977-1978 \\ 1979-E1981|Rubber Plug|Gearcase Cover Bumper Stem|XLCR \\ XL, XLS|{{ :​techtalk:​ih:​engmech:​1977-e1981_cam_cover_rubber_plug_25221-77_by_robison_motorcycles.jpg?​linkonly |Pic}} ((photo courtesy of Ebay seller, Robison Motorcycles [[ https://​www.ebay.com/​str/​robisonmotorcycles?​_trksid=p2047675.l2563 |Link to Ebay Store]] ))|
 |26420-57|1957-1976|Adapter Fitting|Oil Pressure Switch Fitting|Sportsters| |26420-57|1957-1976|Adapter Fitting|Oil Pressure Switch Fitting|Sportsters|
 |27325-33|1952-1965|Plug|Linkert Carb Idle Passage Plug|K Models, Sportsters| |27325-33|1952-1965|Plug|Linkert Carb Idle Passage Plug|K Models, Sportsters|
Line 450: Line 449:
 ^{{techtalk:​miscres:​instruction_sheet_header_4.png?​nolink&​850|}}|||||| ^{{techtalk:​miscres:​instruction_sheet_header_4.png?​nolink&​850|}}||||||
 |HD Part#​|Year(s) \\ Available|Description|Uses|Models|Pic(s)| |HD Part#​|Year(s) \\ Available|Description|Uses|Models|Pic(s)|
-|9851|L1955- ​ \\ \\ 1954-1979 \\ \\ 1954-1963 \\ 1954-1970|5/​16"​-32 Straight \\ Grease (Zerk) Fitting ((The Doctor71 of the XLFORUM ​http://​xlforum.net/​forums/showthread.php?​t=1671259))|Shifter Shaft Grease Fitting \\ Brake Pedal \\ Kicker Grease Fitting \\ Rear Hub Grease Fitting \\ Front Hub Grease Fitting \\ Seat Bar Grease Fitting|KH, Sportsters|+|9851|L1955- ​ \\ \\ 1954-1979 \\ \\ 1954-1963 \\ 1954-1970|5/​16"​-32 Straight \\ Grease (Zerk) Fitting ((The Doctor71 of the XLFORUM ​https://www.xlforum.net/​forum/sportster-motorcycle-forum/​sportster-motorcycle-era-specific-and-model-specific/​ironhead-sportster-motorcycle-talk-1957-1985/​156030-grease-fitting-size?​t=1671259))|Shifter Shaft Grease Fitting \\ Brake Pedal \\ Kicker Grease Fitting \\ Rear Hub Grease Fitting \\ Front Hub Grease Fitting \\ Seat Bar Grease Fitting|KH, Sportsters|{{:​techtalk:​ref:​oil:​fitting_9851_grease_fitting_1954-1979_k_model_and_sportster.jpg?​linkonly|Pic}}|
 |24633-77|1977-1978|Piping Assembly|Crankcase Breather Valve|Sportsters| |24633-77|1977-1978|Piping Assembly|Crankcase Breather Valve|Sportsters|
 |24912-52A|1954-1976|5/​16"​ Tubing \\ with 24918-52 Fitting|Crankcase Vent Tube|KH, Sportsters| |24912-52A|1954-1976|5/​16"​ Tubing \\ with 24918-52 Fitting|Crankcase Vent Tube|KH, Sportsters|
Line 458: Line 457:
 |:::​|Replaced by 24918-52A in 1977||||:::​| ​ |:::​|Replaced by 24918-52A in 1977||||:::​| ​
 |24918-52A|1977-1978|5/​8"​-11 x 5/16" \\ Flared Tube Nipple|Crankcase Breather Tube Fitting|Sportsters|{{ :​techtalk:​ref:​oil:​fitting_24918-52a_breather_pipe_fitting_by_57harleyrider.jpg?​linkonly |Pic1}} ((photo courtesy of Ebay seller, 57harleyrider. [[https://​www.ebay.com/​str/​57harleyrider|Link to Ebay Store]] ))| |24918-52A|1977-1978|5/​8"​-11 x 5/16" \\ Flared Tube Nipple|Crankcase Breather Tube Fitting|Sportsters|{{ :​techtalk:​ref:​oil:​fitting_24918-52a_breather_pipe_fitting_by_57harleyrider.jpg?​linkonly |Pic1}} ((photo courtesy of Ebay seller, 57harleyrider. [[https://​www.ebay.com/​str/​57harleyrider|Link to Ebay Store]] ))|
-|25715-47|1954-1976|Grease (Zerk) Fitting|Brake Cross Shaft Grease Fitting|KH, Sportsters|{{ :​techtalk:​ref:​oil:​fitting_25715-47_by_robisonmotorcycles.jpg?​linkonly |Pic1}} ((photo courtesy of Ebay seller, Robison Motorcycles [[ https://​www.ebay.com/​str/​robisonmotorcycles?​_trksid=p2047675.l2563 |Link to Ebay Store]] ))|+|25715-47|1954-1976|Grease (Zerk) Fitting ​\\ Press fit|Brake Cross Shaft Grease Fitting|KH, Sportsters|{{ :​techtalk:​ref:​oil:​fitting_25715-47_by_robisonmotorcycles.jpg?​linkonly |Pic1}} ((photo courtesy of Ebay seller, Robison Motorcycles [[ https://​www.ebay.com/​str/​robisonmotorcycles?​_trksid=p2047675.l2563 |Link to Ebay Store]] ))|
 |26272-81|1981-1985|Press Fit to 1/4" \\ Hose Bibb Steel Nipple|Trans Vent Fitting|Sportsters| |26272-81|1981-1985|Press Fit to 1/4" \\ Hose Bibb Steel Nipple|Trans Vent Fitting|Sportsters|
 |26338-68|L1983-1984|1/​8"​-27 NPT 90° Fitting \\ (male & female ends)|Upper Head Oil Drain Fitting|XR-1000|{{ :​techtalk:​ref:​oil:​fitting_26338-68_by_hippysmack.jpg?​linkonly |Pic1}} ((photo by Hippysmack)) \\ {{ :​techtalk:​ref:​oil:​fitting_26338-68_for_1986-1990_xl_application_by_hippysmack.jpg?​linkonly |Pic2}} ((photo by Hippysmack))| |26338-68|L1983-1984|1/​8"​-27 NPT 90° Fitting \\ (male & female ends)|Upper Head Oil Drain Fitting|XR-1000|{{ :​techtalk:​ref:​oil:​fitting_26338-68_by_hippysmack.jpg?​linkonly |Pic1}} ((photo by Hippysmack)) \\ {{ :​techtalk:​ref:​oil:​fitting_26338-68_for_1986-1990_xl_application_by_hippysmack.jpg?​linkonly |Pic2}} ((photo by Hippysmack))|
 |:::​|1986-1990|:::​|Oil Pump Fitting \\ Return Outlet to Tank|Sportsters|:::​| |:::​|1986-1990|:::​|Oil Pump Fitting \\ Return Outlet to Tank|Sportsters|:::​|
 +|26383-32|1958-1969|Screw Kit|Chain Oiler Screw Kit|XLCH|{{ :​techtalk:​ref:​oil:​chain_oiler_adjuster_screw_26383-32_for_1958-1969_xlc_-_xlch_by_sum-body1.jpg?​linkonly |Pic}} ((photo courtesy of Ebay seller, Sum-body'​s Harley Parts, [[https://​www.ebay.com/​str/​sumbodysharleyparts|Link to Ebay Store]] ))|
 +|:::​|Replaced by 63610-70 in 1971||||:::​|
 |26420-57|1957-1976|7/​16"​-24 NF x 1/​8"​-27 NPT \\ Nipple|Oil Pump Pressure Switch|Sportsters| ​ | |26420-57|1957-1976|7/​16"​-24 NF x 1/​8"​-27 NPT \\ Nipple|Oil Pump Pressure Switch|Sportsters| ​ |
-|:::|Some say the pump side is 7-16"​x24, ​ one says M12x1. ((bustert of the XLFORUM ​http://​xlforum.net/​forums/showthread.php?​t=2012025&​page=2)) ((7-16"​ (.4375) x 24 TPI or converted to metric as; = 11.1125mm x 1.057mm (1/24 = 0.0416"​ or 1.05664mm). M12x1 = 12mm x 1mm so the 2 threads are close but they are not interchangeable. - Hippysmack)) \\ It's best to use a SAE and metric thread gauge on your particular fitting ​ to be sure.||||:::​|+|:::|Some say the pump side is 7-16"​x24, ​ one says M12x1. ((bustert of the XLFORUM ​https://www.xlforum.net/​forum/sportster-motorcycle-forum/​sportster-motorcycle-era-specific-and-model-specific/​ironhead-sportster-motorcycle-talk-1957-1985/​188994-lets-talk-oil-pumps/​page2?​t=2012025&​page=2)) ((7-16"​ (.4375) x 24 TPI or converted to metric as; = 11.1125mm x 1.057mm (1/24 = 0.0416"​ or 1.05664mm). M12x1 = 12mm x 1mm so the 2 threads are close but they are not interchangeable. - Hippysmack)) \\ It's best to use a SAE and metric thread gauge on your particular fitting ​ to be sure.||||:::​|
 |26496-75|1977-1981|1/​8"​-27 NPT to 3/8" \\ Hose Barb 90° Fitting|Oil Pump Return to \\ Oil Tank Fitting|Sportsters|{{ :​techtalk:​ref:​oil:​fitting_26496-75_by_hippysmack.jpg?​linkonly |Pic1}} ((photo by Hippysmack))| |26496-75|1977-1981|1/​8"​-27 NPT to 3/8" \\ Hose Barb 90° Fitting|Oil Pump Return to \\ Oil Tank Fitting|Sportsters|{{ :​techtalk:​ref:​oil:​fitting_26496-75_by_hippysmack.jpg?​linkonly |Pic1}} ((photo by Hippysmack))|
 |:::​|L1983-1985|:::​|Oil Pump Fitting \\ Return to Oil Tank|Sportsters|:::​| |:::​|L1983-1985|:::​|Oil Pump Fitting \\ Return to Oil Tank|Sportsters|:::​|
Line 479: Line 480:
 |:::|1978 \\ 1980-1981|:::​|(F) Brake Line to Tee Fitting|Sportsters|:::​| |:::|1978 \\ 1980-1981|:::​|(F) Brake Line to Tee Fitting|Sportsters|:::​|
 |:::​|1978-1979|:::​|(R) Master Cyl Brake Line Fitting|Sportsters|:::​| |:::​|1978-1979|:::​|(R) Master Cyl Brake Line Fitting|Sportsters|:::​|
-|43308-78|1978-E1979|(FM) AN3 (3/​8"​-24) \\ Inverted Flare Tee ((ericfreeman of the XLFORUM ​http://​xlforum.net/​forums/showthread.php?​t=667563&​page=3))|Front Brake Line Tee|Sportsters|{{ :​techtalk:​ih:​wheels:​fitting_43308-78_brake_line_tee_by_robisonmotorcycles.jpg?​linkonly |Pic1}} ​ ((photos courtesy of Ebay seller, Robison Motorcycles [[ https://​www.ebay.com/​str/​robisonmotorcycles?​_trksid=p2047675.l2563 |Link to Ebay Store]] ))|+|43308-78|1978-E1979|(FM) AN3 (3/​8"​-24) \\ Inverted Flare Tee ((ericfreeman of the XLFORUM ​https://www.xlforum.net/​forum/sportster-motorcycle-forum/​sportster-motorcycle-era-specific-and-model-specific/​ironhead-sportster-motorcycle-talk-1957-1985/​86228-gimme-a-break-er-some-brakes/​page3?​t=667563&​page=3))|Front Brake Line Tee|Sportsters|{{ :​techtalk:​ih:​wheels:​fitting_43308-78_brake_line_tee_by_robisonmotorcycles.jpg?​linkonly |Pic1}} ​ ((photos courtesy of Ebay seller, Robison Motorcycles [[ https://​www.ebay.com/​str/​robisonmotorcycles?​_trksid=p2047675.l2563 |Link to Ebay Store]] ))|
 |44141-77|1979-1981|Brass Fitting|Rear Caliper Brake Hose Fitting \\ Flare to Inverted Flare Insert|Sportsters|{{ :​techtalk:​ih:​wheels:​brake_caliper_hose_insert_44141-77_by_sum-body1.jpg?​linkonly |Pic1}} ((photos courtesy of Ebay seller, Sum-body'​s Harley Parts, [[https://​www.ebay.com/​str/​sumbodysharleyparts|Link to Ebay Store]] ))| |44141-77|1979-1981|Brass Fitting|Rear Caliper Brake Hose Fitting \\ Flare to Inverted Flare Insert|Sportsters|{{ :​techtalk:​ih:​wheels:​brake_caliper_hose_insert_44141-77_by_sum-body1.jpg?​linkonly |Pic1}} ((photos courtesy of Ebay seller, Sum-body'​s Harley Parts, [[https://​www.ebay.com/​str/​sumbodysharleyparts|Link to Ebay Store]] ))|
 |44287-77|1979|Brass Tee (1M, 2FM)|Rear Brake Line Tee|Sportsters|{{ :​techtalk:​ih:​wheels:​1979_sportster_rear_brake_line_tee_44287-77_by_jrsvintageharley1990.jpg?​linkonly |Pic1}} ((photo courtesy of Ebay seller, jrsvintageharley1990. [[https://​www.ebay.com/​str/​jrsvintageharleyparts?​_trksid=p2047675.l2563|Link to Ebay Store]] ​ ))| |44287-77|1979|Brass Tee (1M, 2FM)|Rear Brake Line Tee|Sportsters|{{ :​techtalk:​ih:​wheels:​1979_sportster_rear_brake_line_tee_44287-77_by_jrsvintageharley1990.jpg?​linkonly |Pic1}} ((photo courtesy of Ebay seller, jrsvintageharley1990. [[https://​www.ebay.com/​str/​jrsvintageharleyparts?​_trksid=p2047675.l2563|Link to Ebay Store]] ​ ))|
Line 498: Line 499:
 |63525-67|1970-1976|1/​8"​-27 NPT (M to FM) \\ 90° Elbow (hex body)|Oil Return Fitting \\ on Right Case|XLCH|{{ :​techtalk:​ref:​oil:​fitting_63525-67_oil_return_elbow_half_by_sum-body1_pic1.jpg?​linkonly |Pic1}} ((photo courtesy of Ebay seller, Sum-body'​s Harley Parts, [[https://​www.ebay.com/​str/​sumbodysharleyparts|Link to Ebay Store]] )) \\ {{ :​techtalk:​ref:​oil:​fitting_63525-67_oil_return_elbow_half_by_sum-body1_pic2.jpg?​linkonly |Pic2}} ((photo courtesy of Ebay seller, Sum-body'​s Harley Parts, [[https://​www.ebay.com/​str/​sumbodysharleyparts|Link to Ebay Store]] ))| |63525-67|1970-1976|1/​8"​-27 NPT (M to FM) \\ 90° Elbow (hex body)|Oil Return Fitting \\ on Right Case|XLCH|{{ :​techtalk:​ref:​oil:​fitting_63525-67_oil_return_elbow_half_by_sum-body1_pic1.jpg?​linkonly |Pic1}} ((photo courtesy of Ebay seller, Sum-body'​s Harley Parts, [[https://​www.ebay.com/​str/​sumbodysharleyparts|Link to Ebay Store]] )) \\ {{ :​techtalk:​ref:​oil:​fitting_63525-67_oil_return_elbow_half_by_sum-body1_pic2.jpg?​linkonly |Pic2}} ((photo courtesy of Ebay seller, Sum-body'​s Harley Parts, [[https://​www.ebay.com/​str/​sumbodysharleyparts|Link to Ebay Store]] ))|
 |63526-57|1957-1978 \\ 1958-E1962|1/​8"​-27 to Tube Fitting|Oil Tank Vent Line Fitting|XL, XLH \\ XLCH| |63526-57|1957-1978 \\ 1958-E1962|1/​8"​-27 to Tube Fitting|Oil Tank Vent Line Fitting|XL, XLH \\ XLCH|
-|:::​|1957-1985|1/​8"​-27 x 3/16" O.D. ((brucstoudt of the XLFORUM ​http://​xlforum.net/​forums/showthread.php?​t=1961426))|Rocker Box Oil Line Connector|+|:::​|1957-1985|1/​8"​-27 x 3/16" O.D. ((brucstoudt of the XLFORUM ​https://www.xlforum.net/​forum/sportster-motorcycle-forum/​sportster-motorcycle-era-specific-and-model-specific/​ironhead-sportster-motorcycle-talk-1957-1985/​182061-stock-rocker-oil-line-inside-diameter?​t=1961426))|Rocker Box Oil Line Connector|
 |63527-57|1957-1978|Compression Nut|Rocker Box Oil \\ Line Fitting Nut|Sportsters| |63527-57|1957-1978|Compression Nut|Rocker Box Oil \\ Line Fitting Nut|Sportsters|
 |:::​|Replaced by 63527-57A in 1979|||| |:::​|Replaced by 63527-57A in 1979||||
Line 511: Line 512:
 |63533-52|1954-E1961|NPT to Rubber Hose \\ Straight Fitting|Oil Tank Fitting \\ Feed Line to Engine|KH, XL, XLH| |63533-52|1954-E1961|NPT to Rubber Hose \\ Straight Fitting|Oil Tank Fitting \\ Feed Line to Engine|KH, XL, XLH|
 |63539-54|L1954-E1961|NPT to Rubber Hose 45° Elbow|Engine Fitting \\ Feed Line Elbow|KH, XL, XLH| |63539-54|L1954-E1961|NPT to Rubber Hose 45° Elbow|Engine Fitting \\ Feed Line Elbow|KH, XL, XLH|
-|63539-66|1966-1969|1/​8"​-27 (M to FM) \\ 90° Elbow Fitting|Lower Feed Line Elbow|XLCH|+|63539-66|1966-1969|1/​8"​-27 (M to FM) \\ 90° Elbow Fitting|Lower Feed Line Elbow|XLCH|{{:​techtalk:​ih:​oil:​1966-1969_xlch_lower_oil_feed_elbow_63539-66_by_rusty_dusty_motorcycle_parts.jpg?​linkonly|Pic}} ((photo courtesy of Ebay seller, Rusty Dusty Motorcycle Parts. [[https://​www.ebay.com/​str/​bialystreasures|Link to Ebay Store]] )) |
 |63540-52|1958-E1962|1/​8"​-27 NPT x 3/8" \\ Hose Bibb 45° Elbow|Oil Return Line \\ Fitting at Case|XLCH| |63540-52|1958-E1962|1/​8"​-27 NPT x 3/8" \\ Hose Bibb 45° Elbow|Oil Return Line \\ Fitting at Case|XLCH|
 |63540-53|1958-E1962 \\ 1958-1966 |1/​4"​-18 NPT x 3/8" \\ Hose Bibb 45° Elbow|Oil Pump Feed Line \\ Fitting at Case|XLCH \\ XLH| |63540-53|1958-E1962 \\ 1958-1966 |1/​4"​-18 NPT x 3/8" \\ Hose Bibb 45° Elbow|Oil Pump Feed Line \\ Fitting at Case|XLCH \\ XLH|
Line 522: Line 523:
 |63570-56|1954-1964|Metal Tube w/ Fittings|Vent Line Tubing|KH, XLH| |63570-56|1954-1964|Metal Tube w/ Fittings|Vent Line Tubing|KH, XLH|
 |63570-56A|1956-1966|Metal Tube w/ Fittings|Vent Line Tubing|XLH| |63570-56A|1956-1966|Metal Tube w/ Fittings|Vent Line Tubing|XLH|
-|63577-36|1958-1969|Banjo Fitting|Oil Tank Vent Line Fitting|XLCH| +|63577-36|1958-1969|Banjo Fitting|Oil Tank Vent Line Fitting|XLCH|{{ :​techtalk:​ref:​oil:​1958-1969_xlch_oil_tank_vent_line_fitting_63577-36_and_banjo_bolt_63578-36_by_belmonthd.jpg?​linkonly |Pic}} ((photo courtesy of belmonthd, [[https://​www.ebay.com/​str/​belmonthd?​_trksid=p2047675.m3561.l2563|Link to Ebay Store]] ))
-|63578-36|1958-1969|Banjo Bolt|Oil Tank Vent Line \\ Fitting Bolt|XLCH|+|63578-36|1958-1969|Banjo Bolt|Oil Tank Vent Line \\ Fitting Bolt|XLCH|:::|
 |63578-41|1958-1969|Banjo Fitting Assembly|Oil Tank Vent Line Fitting Bolt|XLCH| |63578-41|1958-1969|Banjo Fitting Assembly|Oil Tank Vent Line Fitting Bolt|XLCH|
 |63578-52|1958-1965|1/​8"​-27 NPT x 1/4" \\ Hose Bibb Fitting|Oil Tank Vent Line \\ Fitting at Case|XLCH|{{ :​techtalk:​ref:​oil:​fitting_63578-52_by_ebay_57harleyrider_pic1.jpg?​linkonly |Pic1}} ((photo courtesy of Ebay seller, 57harleyrider. [[https://​www.ebay.com/​str/​57harleyrider|Link to Ebay Store]] ))| |63578-52|1958-1965|1/​8"​-27 NPT x 1/4" \\ Hose Bibb Fitting|Oil Tank Vent Line \\ Fitting at Case|XLCH|{{ :​techtalk:​ref:​oil:​fitting_63578-52_by_ebay_57harleyrider_pic1.jpg?​linkonly |Pic1}} ((photo courtesy of Ebay seller, 57harleyrider. [[https://​www.ebay.com/​str/​57harleyrider|Link to Ebay Store]] ))|
Line 536: Line 537:
 |63595-67|1967-E1972 \\ 1970-E1972|Fitting w/ Mounting Tab|Rear Chain Oiler Body|XLH \\ XLCH|{{ :​techtalk:​ref:​oil:​fitting_63595-67_rear_chain_oiler_body_by_robisonmotorcycles.jpg?​linkonly |Pic1}} ((photo courtesy of Ebay seller, Robison Motorcycles [[ https://​www.ebay.com/​str/​robisonmotorcycles?​_trksid=p2047675.l2563 |Link to Ebay Store]] ))| |63595-67|1967-E1972 \\ 1970-E1972|Fitting w/ Mounting Tab|Rear Chain Oiler Body|XLH \\ XLCH|{{ :​techtalk:​ref:​oil:​fitting_63595-67_rear_chain_oiler_body_by_robisonmotorcycles.jpg?​linkonly |Pic1}} ((photo courtesy of Ebay seller, Robison Motorcycles [[ https://​www.ebay.com/​str/​robisonmotorcycles?​_trksid=p2047675.l2563 |Link to Ebay Store]] ))|
 |63595-72A|L1972-1976|Fitting w/ Mounting Tab|Rear Chain Oiler Body|XLH, XLCH|{{ :​techtalk:​ref:​oil:​fitting_63595-72_rear_chain_oiler_body_by_rusty_dusty_parts.jpg?​linkonly |Pic1}} ((photo courtesy of Ebay seller, Rusty Dusty Motorcycle Parts. [[https://​www.ebay.com/​str/​bialystreasures|Link to Ebay Store]] ))| |63595-72A|L1972-1976|Fitting w/ Mounting Tab|Rear Chain Oiler Body|XLH, XLCH|{{ :​techtalk:​ref:​oil:​fitting_63595-72_rear_chain_oiler_body_by_rusty_dusty_parts.jpg?​linkonly |Pic1}} ((photo courtesy of Ebay seller, Rusty Dusty Motorcycle Parts. [[https://​www.ebay.com/​str/​bialystreasures|Link to Ebay Store]] ))|
-|63601-54|1958-1969|2-Way (1-NPT) x (SAE) x 1/4" \\ Hose Bibb Regulating \\ Fitting (with screw)|Chain Oiler Hose \\ Oil Tank Fitting|XLCH|+|63601-54|1958-1969|2-Way (1-NPT) x (SAE) x 1/4" \\ Hose Bibb Regulating \\ Fitting (with screw)|Chain Oiler Hose \\ Oil Tank Fitting|XLCH|{{:​techtalk:​ref:​oil:​1958-1969_xlch_chain_oiler_fitting_63601-54_by_belmonthd.jpg?​linkonly|Pic}} ((photos courtesy of belmonthd, compiled by Hippysmack [[https://​www.ebay.com/​str/​belmonthd?​_trksid=p2047675.m3561.l2563|Link to Ebay Store]] ))|
 |63604-72|1972-1976|Fitting|Rear Chain Oiler \\ Pipe Fitting|XLH,​ XLCH|{{:​techtalk:​ref:​oil:​fitting_63604-72_for_chain_oiler_pipe_by_57harleyrider.jpg?​linkonly|Pic1}} ((photo courtesy of Ebay seller, 57harleyrider. [[https://​www.ebay.com/​str/​57harleyrider|Link to Ebay Store]] ))| |63604-72|1972-1976|Fitting|Rear Chain Oiler \\ Pipe Fitting|XLH,​ XLCH|{{:​techtalk:​ref:​oil:​fitting_63604-72_for_chain_oiler_pipe_by_57harleyrider.jpg?​linkonly|Pic1}} ((photo courtesy of Ebay seller, 57harleyrider. [[https://​www.ebay.com/​str/​57harleyrider|Link to Ebay Store]] ))|
 |63607-53|1954-1966|3-Way Threaded \\ Regulating Fitting|Chain Oiler Hose Fitting|KH, XL, XLH| |63607-53|1954-1966|3-Way Threaded \\ Regulating Fitting|Chain Oiler Hose Fitting|KH, XL, XLH|
Line 543: Line 544:
 |63609-72|1972-1978|1/​8"​-27 NPSF Fitting|Rear Chain Oiler Pipe Fitting|XLH,​ XLCH|{{ :​techtalk:​ref:​oil:​fitting_63609-72_by_57harleyrider.jpg?​linkonly |Pic1}} ((photo courtesy of J&​M'​s Ebay Store Harley Disney Toys, labeled by Hippysmack [[https://​www.ebay.com/​str/​recycledharleydavidsonparts|Link to Ebay Store]] ))| |63609-72|1972-1978|1/​8"​-27 NPSF Fitting|Rear Chain Oiler Pipe Fitting|XLH,​ XLCH|{{ :​techtalk:​ref:​oil:​fitting_63609-72_by_57harleyrider.jpg?​linkonly |Pic1}} ((photo courtesy of J&​M'​s Ebay Store Harley Disney Toys, labeled by Hippysmack [[https://​www.ebay.com/​str/​recycledharleydavidsonparts|Link to Ebay Store]] ))|
 |:::​|L1973-1977|:::​|(F) Master Cyl Brake Line Fitting|Sportsters|:::​| |:::​|L1973-1977|:::​|(F) Master Cyl Brake Line Fitting|Sportsters|:::​|
-|63610-53A|1954-E1970|Screw|Chain Oiler Fitting Adj Screw|KH, XL, XLH| +|63610-53A|L1960-1970 \\ 1970|Screw|Chain Oiler Fitting Adj Screw|XL, XLH \\ XLCH|{{ :​techtalk:​ref:​oil:​1960l-1970_xl_-_xlh_1970_xlch_chain_adjuster_screw_63610-53a_by_jrsvintageharley1990.jpg?​linkonly |Pic}} ((photo courtesy of Ebay seller, jrsvintageharley1990. [[https://​www.ebay.com/​str/​jrsvintageharleyparts?​_trksid=p2047675.l2563|Link to Ebay Store]] ​ ))
-|63610-70|1954-1976 \\ 1958-1976|Screw|Chain Oiler Adjusting Screw|KH, XL, \\ XLH, XLCH|{{ :​techtalk:​ref:​tools:​1954-1976_kh-sportster_chain_oiler_adj_screw_by_robison_motorcycles.jpg?​linkonly |Pic1}} ((photos courtesy of Ebay seller, Robison Motorcycles [[ https://​www.ebay.com/​str/​robisonmotorcycles?​_trksid=p2047675.l2563 |Link to Ebay Store]] ))|+|:::​|Replaced by screw kit 63610-70 ​in 1970||||:::| 
 +|63610-70|1970-1976|Screw ​Kit|Chain Oiler Adjusting Screw|XLH, XLCH|{{ :​techtalk:​ref:​tools:​1954-1976_kh-sportster_chain_oiler_adj_screw_by_robison_motorcycles.jpg?​linkonly |Pic1}} ((photos courtesy of Ebay seller, Robison Motorcycles [[ https://​www.ebay.com/​str/​robisonmotorcycles?​_trksid=p2047675.l2563 |Link to Ebay Store]] ))
 +|:::​|Replaced screw kits in 1970 for 1954-1969 KH, XL, XLH, XLCH chain oiler fittings||||:::​|
 |63614-72|1977-1978|Screw|Chain Oiler Adjusting Screw|XLH, XLCH|{{ :​techtalk:​ref:​tools:​1977-1978_xlh-xlch_chain_oiler_adjusting_screw_63614-72_by_sum-body1.jpg?​linkonly |Pic1}} ((photo courtesy of Ebay seller, Sum-body'​s Harley Parts, [[https://​www.ebay.com/​str/​sumbodysharleyparts|Link to Ebay Store]] ))| |63614-72|1977-1978|Screw|Chain Oiler Adjusting Screw|XLH, XLCH|{{ :​techtalk:​ref:​tools:​1977-1978_xlh-xlch_chain_oiler_adjusting_screw_63614-72_by_sum-body1.jpg?​linkonly |Pic1}} ((photo courtesy of Ebay seller, Sum-body'​s Harley Parts, [[https://​www.ebay.com/​str/​sumbodysharleyparts|Link to Ebay Store]] ))|
 |63792-77|1956-1978|3/​8"​ Steel Sleeve|Oil Cooler Hose Connector|KH,​ Sportsters| |63792-77|1956-1978|3/​8"​ Steel Sleeve|Oil Cooler Hose Connector|KH,​ Sportsters|
Line 551: Line 554:
 ====== Engine ====== ====== Engine ======
 ^{{techtalk:​miscres:​instruction_sheet_header_4.png?​nolink&​850|}}|||||| ^{{techtalk:​miscres:​instruction_sheet_header_4.png?​nolink&​850|}}||||||
-|HD Part#​|Year(s) \\ Available|Description|Uses|Models|Pic(s)|+|HD Part#​|Year(s) \\ Available|Description|Uses|Models|Pics|
 |858|L1983-1984|Bolt|Rocker Arm Cover Bolt|XR-1000| |858|L1983-1984|Bolt|Rocker Arm Cover Bolt|XR-1000|
 |908|1980|1/​4"​ x 20 x 1-1/2" \\ Posidriv Head Screw|Primary Cover Screw|XL, XLS| |908|1980|1/​4"​ x 20 x 1-1/2" \\ Posidriv Head Screw|Primary Cover Screw|XL, XLS|
Line 577: Line 580:
 |:::|1979- |:::|Top Right Primary Cover Screw|XL, XLCH| |:::|1979- |:::|Top Right Primary Cover Screw|XL, XLCH|
 |2350W|1967-1970 \\ 1970|1/​4"​ x 20 x 1-3/4" \\ Countersunk Head Screw|Primary Cover Screw|XLH \\ XLCH| |2350W|1967-1970 \\ 1970|1/​4"​ x 20 x 1-3/4" \\ Countersunk Head Screw|Primary Cover Screw|XLH \\ XLCH|
-|2351W|1971-1976|1/​4"​ x 20 x 2" Phillips Head Screw|Primary (tin) Cover Screw|XLH, XLCH|+|2351W|1971-1976|1/​4"​ x 20 x 2" ​\\ Phillips Head Screw|Primary (tin) \\ Cover Screw|XLH, XLCH|
 |2352|1953-1970|1/​4"​ x 20 x 2-1/4" Oval \\ Slotted Head Screw (NC)|Cam Cover Screw|K Models, Sportsters| |2352|1953-1970|1/​4"​ x 20 x 2-1/4" Oval \\ Slotted Head Screw (NC)|Cam Cover Screw|K Models, Sportsters|
 |2353|1953-1970|1/​4"​ x 20 x 2-5/​16"​ Oval \\ Slotted Head Screw (NC)|Cam Cover Screw|K Models, Sportsters| |2353|1953-1970|1/​4"​ x 20 x 2-5/​16"​ Oval \\ Slotted Head Screw (NC)|Cam Cover Screw|K Models, Sportsters|
Line 601: Line 604:
 |3413|1984-1985|5/​16"​ x 18 x 5/8" \\ Hex Socket Head Screw| |XL, XLS, XLX| |3413|1984-1985|5/​16"​ x 18 x 5/8" \\ Hex Socket Head Screw| |XL, XLS, XLX|
 |3417|1979-1980|5/​16"​ x 24 x 2-1/4" one end, \\ 5/16" x 18 x 1/2" other end \\ (black)|Rocker Arm Cover to \\ Frame Bracket Bolt|XLS| |3417|1979-1980|5/​16"​ x 24 x 2-1/4" one end, \\ 5/16" x 18 x 1/2" other end \\ (black)|Rocker Arm Cover to \\ Frame Bracket Bolt|XLS|
-|3440|1979-1980|3/​8"​ x 16 x 1/2 " Hex Head Bolt|Rear Motor Mount to \\ Engine Top Right Bolt|XL, XLCH, XLS| +|3440|1979-1980|3/​8"​ x 16 x 1/2 " ​\\ Hex Head Bolt|Rear Motor Mount to \\ Engine Top Right Bolt|XL, XLCH, XLS| 
-|3455|1982-1985|3/​8"​ x 24 x 3-3/4" Hex Head Bolt|Rear Motor Mount to Frame Bolt|XL, XLS, XLX| +|3455|1982-1985|3/​8"​ x 24 x 3-3/​4" ​\\ Hex Head Bolt|Rear Motor Mount \\ to Frame Bolt|XL, XLS, XLX| 
-|3467|1979-1985|5/​16"​ x 24 x 1-1/4" Hex Head \\ Bolt (grade 5)|Rocker Box Bolt (short center bolt)|XLS|+|3467|1979-1985|5/​16"​ x 24 x 1-1/4" Hex Head \\ Bolt (grade 5)|Rocker Box Bolt \\ (short center bolt)|XLS|
 |3468|1979-1985|5/​16"​ x 24 x 2-1/4" Hex Head \\ Bolt (grade 5, black)|Rockerbox Bolt|XLS| |3468|1979-1985|5/​16"​ x 24 x 2-1/4" Hex Head \\ Bolt (grade 5, black)|Rockerbox Bolt|XLS|
-|3470|E1979|7/​16"​ x 20 x 7/8" Hex Head Bolt|Motor Mount to Head Bolt|XLS| +|3470|E1979|7/​16"​ x 20 x 7/​8" ​\\ Hex Head Bolt|Motor Mount to Head Bolt|XLS| 
-|3474|L1979-1985|7/​16"​ x 20 x 1" \\ Hex Head (NF)|Upper (center) \\ Motor Mount to Heads|XLS|+|3474|L1979-1985|7/​16"​ x 20 x 1" \\ Hex Head (NF)|Upper (center) ​Motor \\ Mount to Heads|XLS|
 |3478|1981-1985|1/​4"​ x 20 x 2-1/2" \\ Socket Fillister Head Bolt|Primary Cover Bolt|XL, XLS, XLX| |3478|1981-1985|1/​4"​ x 20 x 2-1/2" \\ Socket Fillister Head Bolt|Primary Cover Bolt|XL, XLS, XLX|
 |3479|1981-1985|1/​4"​ x 20 x 2-1/4" \\ Socket Head Bolt|Primary Cover Bolt|XL, XLS, XLX| |3479|1981-1985|1/​4"​ x 20 x 2-1/4" \\ Socket Head Bolt|Primary Cover Bolt|XL, XLS, XLX|
Line 621: Line 624:
 |3953W|1954-E1971 \\ 1970-E1971|5/​16"​ x 24 x 1/2" ex Head Bolt \\ (NF, Grade 5, Cadmium)|Lower Primary Chain Adj \\ to Brace Bolt|KH, XL, XLH \\ XLCH| |3953W|1954-E1971 \\ 1970-E1971|5/​16"​ x 24 x 1/2" ex Head Bolt \\ (NF, Grade 5, Cadmium)|Lower Primary Chain Adj \\ to Brace Bolt|KH, XL, XLH \\ XLCH|
 |3953W|1954-1981|5/​16"​ x 24 x 1/2" \\ Hex Head Bolt \\ (NF, Grade 5, Cadmium)|Oil Cooler to \\ Mounting Bracket Bolt \\ oil cooler kit \\ (62571-77 or 62577-77)|XL,​ XLCH, XLS| |3953W|1954-1981|5/​16"​ x 24 x 1/2" \\ Hex Head Bolt \\ (NF, Grade 5, Cadmium)|Oil Cooler to \\ Mounting Bracket Bolt \\ oil cooler kit \\ (62571-77 or 62577-77)|XL,​ XLCH, XLS|
-|3987|1979-1981|5/​16"​ x 18 x 3/4" Hex Head Bolt|Deluxe Oil Cooler to\\  Mounting Bracket Bolt|XL, XLCH, XLS| +|3987|1979-1981|5/​16"​ x 18 x 3/​4" ​\\ Hex Head Bolt|Deluxe Oil Cooler to \\  Mounting Bracket Bolt|XL, XLCH, XLS| 
-|3991|1977-1985|5/​16"​ x 18 x 7/8" Hex Head Bolt|Upper Front Engine ​Mount \\ "​L"​ Bracket Bolt|XL, XLCH, XLS| +|3991|1977-1985|5/​16"​ x 18 x 7/​8" ​\\ Hex Head Bolt|Upper Front Engine \\ Mount "​L"​ Bracket Bolt|XL, XLCH, XLS| 
-|3996|1956-1981|5/​16"​ x 24 x 7/8" Hex Head Bolt|Oil Cooler Bracket to Frame Bolt \\ oil cooler kit \\ (62571-77 ​or 62577-77)|XL,​ XLCH, XLS|+|3996|1956-1981|5/​16"​ x 24 x 7/​8" ​\\ Hex Head Bolt|Oil Cooler Bracket ​\\ to Frame Bolt \\ oil cooler kit \\ (62571-7762577-77)|XL,​ XLCH, XLS|
 |4005W|1957-1975|5/​16"​ x 18 x 1" \\ Hex Head Bolt (NC)|Tappet Guide Bolt \\ (replaced by 4017 in '​76)|Sportsters| |4005W|1957-1975|5/​16"​ x 18 x 1" \\ Hex Head Bolt (NC)|Tappet Guide Bolt \\ (replaced by 4017 in '​76)|Sportsters|
 |4012|1957-1978|5/​16"​ x 24 x 1-1/8" \\ Hex Head Bolt (NF)|Rocker Box Bolt \\ (short center bolt) \\ (Replaced by 4014W in -78A)|XL, XLH, XLCH| |4012|1957-1978|5/​16"​ x 24 x 1-1/8" \\ Hex Head Bolt (NF)|Rocker Box Bolt \\ (short center bolt) \\ (Replaced by 4014W in -78A)|XL, XLH, XLCH|
Line 632: Line 635:
 |4066|1953-1976|5/​16"​ x 18 x 2-13/​32"​ \\ Hex Head Bolt (NC)|Case Bolt|K Models, Sportsters| |4066|1953-1976|5/​16"​ x 18 x 2-13/​32"​ \\ Hex Head Bolt (NC)|Case Bolt|K Models, Sportsters|
 |4067|1954-1985|5/​16"​ x 18 x 4-1/​2"​|Right Case Bolt \\ Oil Hose Clamp Screw|KH, XL, XLCH, \\ XLS, XLX| |4067|1954-1985|5/​16"​ x 18 x 4-1/​2"​|Right Case Bolt \\ Oil Hose Clamp Screw|KH, XL, XLCH, \\ XLS, XLX|
-|4068|1977-1981|5/​16"​ x 18 x 2-1/2" Hex Head \\ Bolt (grade 5, zinc)|Upper Rear Engine Mount to \\ Frame Bracket Bolt|XL, XLCH XLS| +|4068|1977-1981|5/​16"​ x 18 x 2-1/2" Hex Hd Bolt \\ (grade 5, zinc)|Upper Rear Engine ​\\ Mount to Frame \\ Bracket Bolt|XL, XLCH XLS| 
-|4086|1957-1985|5/​16"​ x 18 x 3" Hex Head Bolt|Case Bolt (and inside primary)|Sportsters|+|4086|1957-1985|5/​16"​ x 18 x 3" Hex Hd Bolt|Case Bolt \\ (and inside primary)|Sportsters|
 |:::​|L1983-1984|:::​|Rocker Arm Cover Screw|XR1000| |:::​|L1983-1984|:::​|Rocker Arm Cover Screw|XR1000|
 |4100 \\ 4100HW|1952-1976|5/​16"​ x 18" x 4-1/​16"​ \\ Hex Head Bolt (NC)|Crankcase Mounting Bolt|K Models, Sportsters| |4100 \\ 4100HW|1952-1976|5/​16"​ x 18" x 4-1/​16"​ \\ Hex Head Bolt (NC)|Crankcase Mounting Bolt|K Models, Sportsters|
Line 641: Line 644:
 |4319|1982|3/​8"​ x 24 x 1" Hex Head \\ Bolt (grade 5, zinc)|Motor Support to \\ Frame Bracket Bolt|XL, XLS| |4319|1982|3/​8"​ x 24 x 1" Hex Head \\ Bolt (grade 5, zinc)|Motor Support to \\ Frame Bracket Bolt|XL, XLS|
 |:::​|L1984-1985|:::​|Lower Front Motor Mount \\ (both front bolts)|XL, XLS, XLX| |:::​|L1984-1985|:::​|Lower Front Motor Mount \\ (both front bolts)|XL, XLS, XLX|
-|4335W \\ 4336W|1952-1971|3/​8"​ x 24 x 1-1/8" \\ Hex Head Bolt (NF)|Motor Mount Bolt \\ Head Straddle to Cross Brace|K Models, Sportsters| +|4335W \\ 4336W|1952-1971|3/​8"​ x 24 x 1-1/8" \\ Hex Head Bolt (NF)|Motor Mount Bolt \\ Head Straddle ​\\ to Cross Brace|K Models, Sportsters| 
-|4336W|1967-1981|3/​8"​ x 24 x 1-1/8" \\ Hex Head Bolt (NF)|Rear Motor Mount \\ to Upper Frame Bolt|XL, XLCH, XLS|+|4336W|1967-1981|3/​8"​ x 24 x 1-1/8" \\ Hex Hd Bolt (NF)|Rear Motor Mount \\ to Upper Frame Bolt|XL, XLCH, XLS|
 |:::​|(replaced by 4335W in '​68)|||| |:::​|(replaced by 4335W in '​68)||||
 |4337W|1983-1985|3/​8"​ x 24 x 1-1/4" Hex Head \\ Bolt (grade 5, zinc, NF)|Motor Support to \\ Frame Bracket Bolt|XL, XLS. XLX| |4337W|1983-1985|3/​8"​ x 24 x 1-1/4" Hex Head \\ Bolt (grade 5, zinc, NF)|Motor Support to \\ Frame Bracket Bolt|XL, XLS. XLX|
 |4340|1979-1985|5/​16"​ X 18 X 4-1/4" \\ Socket Head Bolt|Right Case Bolt|Sportsters| |4340|1979-1985|5/​16"​ X 18 X 4-1/4" \\ Socket Head Bolt|Right Case Bolt|Sportsters|
 |4348|1953- |3/8" x 16 x 1-3/​16"​ \\ Hex Head Bolt (NC)|Rear Motor Mount to \\ Motor Bolt|K Models, Sportsters| |4348|1953- |3/8" x 16 x 1-3/​16"​ \\ Hex Head Bolt (NC)|Rear Motor Mount to \\ Motor Bolt|K Models, Sportsters|
-|4354|E1967- |3/8" x 16 x 1-3/8" \\ Hex Head Bolt|Chain ​Adjuster ​Mounting Bolt|XLH|+|4354|E1967- |3/8" x 16 x 1-3/8" \\ Hex Head Bolt|Chain ​Adj Mounting Bolt|XLH|
 |4380W|1954-E1962|3/​8"​ x 24 x 2" \\ Hex Head Bolt|Rear Motor Mount to \\ Frame (lower) Bolt \\ (replaced 4388B in '​76)|KH,​ XL, XLH, XLCH| |4380W|1954-E1962|3/​8"​ x 24 x 2" \\ Hex Head Bolt|Rear Motor Mount to \\ Frame (lower) Bolt \\ (replaced 4388B in '​76)|KH,​ XL, XLH, XLCH|
 |4388B|1954-E1962|3/​8"​ x 24 x 2-1/​16"​ \\ Hex Head Bolt|Rear Motor Mount to \\ Frame (lower) Bolt \\ (replaced by 4388W in '​76)|KH,​ XL, XLH, XLCH| |4388B|1954-E1962|3/​8"​ x 24 x 2-1/​16"​ \\ Hex Head Bolt|Rear Motor Mount to \\ Frame (lower) Bolt \\ (replaced by 4388W in '​76)|KH,​ XL, XLH, XLCH|
-|4392|L1983-1984|5/​16"​ x 18 x 3-1/4" \\ Hex Head Bolt (grade 5)|Rocker Arm Cover Screw|XR1000|+|4392|L1983-1984|5/​16"​ x 18 x 3-1/4" \\ Hex Hd Bolt (grade 5)|Rocker Arm Cover Screw|XR1000|
 |4412|L1962-1976|3/​8"​ x 24 x 2-1/2" \\ Hex Head Bolt|Rear Engine Mounting Bolt \\ (lower bolts)|XLH/​XLCH| |4412|L1962-1976|3/​8"​ x 24 x 2-1/2" \\ Hex Head Bolt|Rear Engine Mounting Bolt \\ (lower bolts)|XLH/​XLCH|
 |4413|1973-1985|3/​8"​ x 24 x 5-1/2" \\ Hex Head Bolt|Lower Front Motor Mount \\ (lower rear bolt)|Sportsters| |4413|1973-1985|3/​8"​ x 24 x 5-1/2" \\ Hex Head Bolt|Lower Front Motor Mount \\ (lower rear bolt)|Sportsters|
-|4415|1979-1981|3/​8"​ x 24 x 3" \\ Hex Head Bolt|Rear Motor Mount to Frame Bolt|XL, XLCH, XLS|+|4415|1979-1981|3/​8"​ x 24 x 3" \\ Hex Head Bolt|Rear Motor Mount \\ to Frame Bolt|XL, XLCH, XLS|
 |4420|L1982-1985|3/​8"​ x 16 x 2-3/4" \\ Hex Head Bolt \\ (grade 5, zinc)|Rear Motor Mount to \\ Frame (lower) Bolt|XL, XLS, XLX| |4420|L1982-1985|3/​8"​ x 16 x 2-3/4" \\ Hex Head Bolt \\ (grade 5, zinc)|Rear Motor Mount to \\ Frame (lower) Bolt|XL, XLS, XLX|
-|4434W|L1983-1985|3/​8"​ x 24 x 3-1/4" \\ Hex Head Bolt \\ (grade 5, zinc)|Rear Motor Mount to \\ Frame (upper) Bolt|XL, XLS, XLX|+|4434W|L1983-1985|3/​8"​ x 24 x 3-1/4" \\ Hex Head Bolt \\ (grade 5, zinc)|(R) Motor Mount to \\ Frame (upper) Bolt|XL, XLS, XLX|
 |:::​|L1983-1984|:::​|Upper Rear Motor Mount Bolt|XR-1000| |:::​|L1983-1984|:::​|Upper Rear Motor Mount Bolt|XR-1000|
-|4435W|L1983-1985|3/​8"​ x 24 x 3-1/2" \\ Hex Head Bolt \\ (grade 5, zinc)|Rear Motor Mount to \\ Frame (lower) Bolt|XL, XLS, XLX|+|4435W|L1983-1985|3/​8"​ x 24 x 3-1/2" \\ Hex Head Bolt \\ (grade 5, zinc)|(R) Motor Mount to \\ Frame (lower) Bolt|XL, XLS, XLX|
 |:::​|L1983-1984|:::​|Lower Rear Motor Mount Bolt|XR-1000| |:::​|L1983-1984|:::​|Lower Rear Motor Mount Bolt|XR-1000|
-|4452B|L1962- |3/8" x 24 x 2-1/2" \\ Hex Head Bolt (NF)|Rear Motor Mount Bolt (frame)|Sportsters| +|4452B|L1962- |3/8" x 24 x 2-1/2" \\ Hex Head Bolt (NF)|Rear Motor Mount \\ Bolt (frame)|Sportsters| 
-|4452HB|L1962-1975|3/​8"​ x 24 x 2-1/2" \\ Hex Head Bolt|Rear Motor Mount to \\ (lower) Frame Bolt \\ (replaced by 4412 in '​75)|XLH/​XLCH|+|4452HB|L1962-1975|3/​8"​ x 24 x 2-1/2" \\ Hex Head Bolt|Rear Motor Mount \\ to (lower) Frame Bolt \\ (replaced by 4412 in '​75)|XLH/​XLCH|
 |4618W \\ 3470|1957-1979|7/​16 x 20 x 7/8" Hex Head|Upper (center) \\ Motor Mount to Heads|XLH, XLCH| |4618W \\ 3470|1957-1979|7/​16 x 20 x 7/8" Hex Head|Upper (center) \\ Motor Mount to Heads|XLH, XLCH|
 |:::​|E1979|:::​|:::​|XLS| |:::​|E1979|:::​|:::​|XLS|
Line 669: Line 672:
 |4710|1957-1985|5/​16"​ x 24 x 2-1/4" Hex Head \\ Bolt (grade 5, zinc)|Rocker Arm Cover Bolt \\ (replaced 4060W in '​73)|XL,​ XLCH, XLS, XLX|  |4710|1957-1985|5/​16"​ x 24 x 2-1/4" Hex Head \\ Bolt (grade 5, zinc)|Rocker Arm Cover Bolt \\ (replaced 4060W in '​73)|XL,​ XLCH, XLS, XLX| 
 |4712|E1977-1978|3/​8"​ x 16 x 3-1/4" \\ Hex Head Bolt|Upper Primary Adjuster \\ to Brace Bolt|XL, XLCH| |4712|E1977-1978|3/​8"​ x 16 x 3-1/4" \\ Hex Head Bolt|Upper Primary Adjuster \\ to Brace Bolt|XL, XLCH|
-|4714W|1957-E1973|7/​16"​ x 20 x 2-21/​32" ​Hex Head \\ Bolt|Head to Cylinder Bolt|Sportsters|+|4714W|1957-E1973|7/​16"​ x 20 x 2-21/​32"​ \\ Hex Head Bolt|Head to Cylinder Bolt|Sportsters|
 |4715 \\ 4715W|1954-1956|7/​16"​ x 14 x 3" Hex Head \\ Bolt|Head/​Motor Mount \\ Bracket Bolt|KH| |4715 \\ 4715W|1954-1956|7/​16"​ x 14 x 3" Hex Head \\ Bolt|Head/​Motor Mount \\ Bracket Bolt|KH|
-|4716W|1979-1985|3/​8"​ x 16 x 1-1/4" Hex Head \\ Bolt (grade 5, zinc)|Rear Motor Mount to \ Case (top) Bolt|Sportsters| ​+|4716W|1979-1985|3/​8"​ x 16 x 1-1/4" Hex Head \\ Bolt (grade 5, zinc)|Rear Motor Mount to \\ Case (top) Bolt|Sportsters| ​
 |4716W|1954-1976 \\ 1970-1976|3/​8"​ x 16 x 1-1/4" Hex Head \\ Bolt (grade 5, zinc)|Upper Primary Adjuster \\ to Brace Bolt|KH, XL, XLH \\ XLCH| |4716W|1954-1976 \\ 1970-1976|3/​8"​ x 16 x 1-1/4" Hex Head \\ Bolt (grade 5, zinc)|Upper Primary Adjuster \\ to Brace Bolt|KH, XL, XLH \\ XLCH|
 |4718|1953|7/​16"​ x 14 x 3-5/​16"​ \\ Hex Head Bolt|Head/​Motor Mount \\ Bracket Bolt|K| |4718|1953|7/​16"​ x 14 x 3-5/​16"​ \\ Hex Head Bolt|Head/​Motor Mount \\ Bracket Bolt|K|
Line 687: Line 690:
 |16237-52|1952-1956|3/​8"​ x 24 x 7-1/8" (NF)|Lower Front Motor Mount \\ (both front bolts)|K Models| |16237-52|1952-1956|3/​8"​ x 24 x 7-1/8" (NF)|Lower Front Motor Mount \\ (both front bolts)|K Models|
 |16237-57|1957-E1984|3/​8"​ x 24 x 6-13/​16"​ (NF)|Lower Front Motor Mount \\ (both front bolts)|Sportster| |16237-57|1957-E1984|3/​8"​ x 24 x 6-13/​16"​ (NF)|Lower Front Motor Mount \\ (both front bolts)|Sportster|
-|16830-54|1954-1971|3/​8"​ x 2-5/​16"​ stud (NC & NF) \\ (course threads and fine threads)|Cylinder Base Stud|KH, Sportster|  +|16830-54|1954-1971|3/​8"​ x 2-5/​16"​ stud (NC & NF)|Cylinder Base Stud|KH, Sportster|  
-|16830-72|1972-1985|3/​8"​ x 2-11/​32"​ Stud (NF x NC) \\ (course threads and fine threads)|Cylinder Base Stud|Sportster|  +|16830-72|1972-1985|3/​8"​ x 2-11/​32"​ Stud (NF x NC)|Cylinder Base Stud|Sportster|  
-|16865-52|1957-1978|7/​16"​ x 20 x 7/8" Hex Head Bolt \\ (w/ cotter pin hole)|Upper Motor Mount \\ Bracket to Frame Bolt|Sportster|+|16865-52|1957-1978|7/​16"​ x 20 x 7/8" Hex Head Bolt \\ (w/ cotter pin hole)|Upper Motor Mount \\ Bracket to Frame|Sportster|
 |17448-57|1957-E1971|5/​16"​ x 24 \\ Slotted Head Screw|Rocker Shaft End Screw|Sportster| |17448-57|1957-E1971|5/​16"​ x 24 \\ Slotted Head Screw|Rocker Shaft End Screw|Sportster|
 |17448-71|L1971-E1978|1/​2"​ x 20 \\ Allen Head Screw|Rocker Shaft End Screw|Sportster| |17448-71|L1971-E1978|1/​2"​ x 20 \\ Allen Head Screw|Rocker Shaft End Screw|Sportster|
Line 701: Line 704:
 |24818-52|1953-1960|5/​16"​ x 1-11/​16"​ \\ (course threads and fine threads)|Toolbox Mount Stud \\ (top of primary)|K Models, Sportster| |24818-52|1953-1960|5/​16"​ x 1-11/​16"​ \\ (course threads and fine threads)|Toolbox Mount Stud \\ (top of primary)|K Models, Sportster|
 |:::​|1961-1966|:::​|:::​|XLH| |:::​|1961-1966|:::​|:::​|XLH|
-|24824-67|L1972-E1975|3/​8"​ x 2" Stud \\ (NC one end, NF other end)|Rear Motor Mounting Stud (right)|Sportster| +|24824-67|L1972-E1975|3/​8"​ x 2" Stud \\ (NC one end, NF other end)|Rear Motor Mounting ​\\ Stud (right)|Sportster| 
-|24825-66|L1970-E1972|3/​8"​ x 1-5/8" Stud \\ (NC one end, NF other end)|Rear Motor Mounting Stud (right)|Sportster|+|24825-66|L1970-E1972|3/​8"​ x 1-5/8" Stud \\ (NC one end, NF other end)|Rear Motor Mounting ​\\ Stud (right)|Sportster|
 |24825-82|L1982-1985|3/​8"​-16 x 3-1/8" \\ (NC - both ends)|Rear Motor Mounting Stud|Sportster| |24825-82|L1982-1985|3/​8"​-16 x 3-1/8" \\ (NC - both ends)|Rear Motor Mounting Stud|Sportster|
 |24827-66 \\ 24827-66A|1983-1985|5/​16"​ x 1-7/8" Hex Stud \\ (NC one end, NF the other)|Front Intake (only) \\ Tappet Block Stud|XL, XLS| |24827-66 \\ 24827-66A|1983-1985|5/​16"​ x 1-7/8" Hex Stud \\ (NC one end, NF the other)|Front Intake (only) \\ Tappet Block Stud|XL, XLS|
Line 708: Line 711:
 |25787-54 |1954-1956|Stud|Idler Gear Stud|KH| |25787-54 |1954-1956|Stud|Idler Gear Stud|KH|
 |25787-57 |1957-E1984|Stud|Idler Gear Shaft|Sportster| |25787-57 |1957-E1984|Stud|Idler Gear Shaft|Sportster|
-|26383-32|1958-* |Screw Kit|Chain Oiler Screw Kit|XLCH| 
 |32601-78|L1972-1978|Stud|Timer Cover Inner Stud \\ (replaced 32608-72)|XLH,​ XLCH| |32601-78|L1972-1978|Stud|Timer Cover Inner Stud \\ (replaced 32608-72)|XLH,​ XLCH|
 |32608-70|1971-E1972|Stud|Timer Cover Inner Stud|XLH, XLCH|{{ :​techtalk:​ref:​tools:​1971-e1972_sportster_ignition_breaker_plate_timer_stud_32608-70_by_robison_motorcycles.jpg?​linkonly |Pic1}} ((photo courtesy of Ebay seller, Robison Motorcycles [[ https://​www.ebay.com/​str/​robisonmotorcycles?​_trksid=p2047675.l2563 |Link to Ebay Store]] ))| |32608-70|1971-E1972|Stud|Timer Cover Inner Stud|XLH, XLCH|{{ :​techtalk:​ref:​tools:​1971-e1972_sportster_ignition_breaker_plate_timer_stud_32608-70_by_robison_motorcycles.jpg?​linkonly |Pic1}} ((photo courtesy of Ebay seller, Robison Motorcycles [[ https://​www.ebay.com/​str/​robisonmotorcycles?​_trksid=p2047675.l2563 |Link to Ebay Store]] ))|
Line 715: Line 717:
 |34957-52|1953-1956|Screw|Primary Cover Screw|K, KH| |34957-52|1953-1956|Screw|Primary Cover Screw|K, KH|
 |34957-57|1957-1966|Round Head Screw|Primary Cover Screw|XL, XLH|  |34957-57|1957-1966|Round Head Screw|Primary Cover Screw|XL, XLH| 
-|40018-77|1977-1985|Stud|Primary ​Adjuster ​Pivot Stud \\ Front Chain Adj Kit (39967-77A)|XL,​ XLCH, XLS|+|40018-77|1977-1985|Stud|Primary ​Adj Pivot Stud \\ Front Chain Adj \\ Kit (39967-77A)|XL,​ XLCH, XLS|
  
 ====== Oil Pump ====== ====== Oil Pump ======
-^{{techtalk:​miscres:​instruction_sheet_header_4.png?​nolink&​850|}}||||| +^{{techtalk:​miscres:​instruction_sheet_header_4.png?​nolink&​850|}}|||||| 
-|HD Part#​|Year(s) \\ Available|Description|Uses|Models| +|HD Part#​|Year(s) \\ Available|Description|Uses|Models|Pic
-|1794|1979-1981|1/​4"​ x 20 x 2/12" Socket Fillister Head Bolt|Oil Pump Mounting Bolt|XL, XLCH, XLS| +|1794|1979-1981|1/​4"​ x 20 x 2/12" Socket ​\\ Fillister Head Bolt|Oil Pump Mounting Bolt|XL, XLCH, XLS| 
-|2881W|L1971-1976|1/​4"​ x 20 x 2" Hex Head Bolt|Oil Pump Mounting Bolt|XLH/​XLCH|+|2881W|L1971-1976|1/​4"​ x 20 x 2" ​\\ Hex Head Bolt|Oil Pump Mounting Bolt|XLH/​XLCH|
 |3478|1977-1985|1/​4"​ x 20 x 2-1/2" Socket \\ Fillister Head Bolt|Oil Pump Mounting Bolt|Sportsters| |3478|1977-1985|1/​4"​ x 20 x 2-1/2" Socket \\ Fillister Head Bolt|Oil Pump Mounting Bolt|Sportsters|
-|24819-52|1952-E1971|1/​4"​ x 2-5/​16"​ \\ (course one end, fine the other)|Oil Pump Mounting Stud|K Models, Sportster| ​+|24819-52|1952-E1971|1/​4"​ x 2-5/​16"​ \\ (course one end, fine the other)|Oil Pump Mounting Stud|K Models, Sportster|{{ :​techtalk:​ref:​tools:​1952-e1971_k_models_-_sportster_oil_pump_mounting_stud_by_animalhouse2010.jpg?​linkonly |Pic1}} ((photo courtesy of Ebay seller, animalhouse2010,​ [[https://​www.ebay.com/​str/​animalhouse2010?​_trksid=p2047675.l2563|Link to Ebay store:]] ))|
 |26389-55|1955|Set Screw|Check Valve Set Screw|KH| |26389-55|1955|Set Screw|Check Valve Set Screw|KH|
  
Line 970: Line 972:
 ^{{techtalk:​miscres:​instruction_sheet_header_4.png?​nolink&​850|}}||||| ^{{techtalk:​miscres:​instruction_sheet_header_4.png?​nolink&​850|}}|||||
 |HD Part#​|Year(s) \\ Available|Description|Uses|Models| |HD Part#​|Year(s) \\ Available|Description|Uses|Models|
-|N/A|  |#8 x 1-1/2 Screw|Voltage Regulator Cap Screw ((brucstoudt of the XLFORUM ​http://​xlforum.net/​forums/showthread.php?​t=1677718&​page=5))|XLCH|  ​+|N/A|  |#8 x 1-1/2 Screw|Voltage Regulator Cap Screw ((brucstoudt of the XLFORUM ​https://www.xlforum.net/​forum/sportster-motorcycle-forum/​sportster-motorcycle-era-specific-and-model-specific/​ironhead-sportster-motorcycle-talk-1957-1985/​156767-voltage-regulator-mounting-and-fasteners/​page5?​t=1677718&​page=5))|XLCH|  ​
 |1063 \\ 1063W|1952-1964|#​8-32 x 3/8" Fillister Head Screw \\ (NC, White)|Voltage Regulator Terminal Screw|K Models, Sportsters| |1063 \\ 1063W|1952-1964|#​8-32 x 3/8" Fillister Head Screw \\ (NC, White)|Voltage Regulator Terminal Screw|K Models, Sportsters|
 |:::​|1954-1964|:::​|Voltage Regulator Terminal Screw|K Models, Sportsters| |:::​|1954-1964|:::​|Voltage Regulator Terminal Screw|K Models, Sportsters|
Line 1252: Line 1254:
 |1300B|1954-1965|#​12-24 x 1/2" Fillister Head Screw|Circuit Breaker Timer Screw|KH, XL, XLCH| |1300B|1954-1965|#​12-24 x 1/2" Fillister Head Screw|Circuit Breaker Timer Screw|KH, XL, XLCH|
 |2572W|1967|#​6-32 Self Tapping \\ Phillips Head Screw|Circuit Breaker (74589-67) \\ Mounting Screw|XLH| |2572W|1967|#​6-32 Self Tapping \\ Phillips Head Screw|Circuit Breaker (74589-67) \\ Mounting Screw|XLH|
-|2573W|1967-|#6-32 Self Tapping \\ Phillips Head Screw|Circuit Breaker (74589-67) \\ Mounting Screw \\ (Replaced 2572W in 1968)|XLH|+|2573W|1968-E1970|#6-32 Self Tapping \\ Phillips Head Screw|Circuit Breaker (74589-67) \\ Mounting Screw \\ (Replaced 2572W in 1968)|XLH|
 |2585|1957-1970|#​8-32 x 5/16" Pozidriv \\ Pan Head Screw|Timer Wire Pin Screw|XL, XLH| |2585|1957-1970|#​8-32 x 5/16" Pozidriv \\ Pan Head Screw|Timer Wire Pin Screw|XL, XLH|
 |:::​|1970|:::​|:::​|XLCH| |:::​|1970|:::​|:::​|XLCH|
Line 1963: Line 1965:
 |56154-52|1952-1972|1/​2"​ x 20 x 2-7/8" Hex Head Bolt|Handlebar Mounting Screw|K Models, Sportsters| |56154-52|1952-1972|1/​2"​ x 20 x 2-7/8" Hex Head Bolt|Handlebar Mounting Screw|K Models, Sportsters|
 |56240-47|1953|Screw|Grip Retainer Screw|K| |56240-47|1953|Screw|Grip Retainer Screw|K|
-|56276-31|1952-1978|#​10-32x 1/4" Set Screw ((Bretton of the XLFORUM ​http://​xlforum.net/​forums/showthread.php?​p=5932631)) |Coil Plug Set Screw|KH, XL, XLH|+|56276-31|1952-1978|#​10-32x 1/4" Set Screw ((Bretton of the XLFORUM ​https://www.xlforum.net/​forum/sportster-motorcycle-forum/​sportster-motorcycle-era-specific-and-model-specific/​ironhead-sportster-motorcycle-talk-1957-1985/​203462-thread-size-for-56276-31#​post5932631)) |Coil Plug Set Screw|KH, XL, XLH|
 |56397-74|1974-1983|Knurled Screw|Throttle Control Adj Screw|XLH, XLCH, XLS| |56397-74|1974-1983|Knurled Screw|Throttle Control Adj Screw|XLH, XLCH, XLS|
 |56402-83 \\ 56402-83A|1979-1990|Screw|Throttle Adj Screw \\ (from grip kits \\ 56397-83 or 56397-74B)|Sportsters| |56402-83 \\ 56402-83A|1979-1990|Screw|Throttle Adj Screw \\ (from grip kits \\ 56397-83 or 56397-74B)|Sportsters|